It's a question that makes every mans blood run cold, but we're talking slot car tracks here.

Recently I took a tiny 4 lane oval to work and had an absolute blast racing out of the back of my car, so much so that I'm now seriously considering making it into a permanent track and abandoning my 1/6th mile. The trend here is to build big, complicated tracks with technical infield sections and long, high speed straights. Is going the other direction so wrong?

Little Bullring II will be the same size as LBI was, with 30" of straights and really tight 6" inside radius corners. My table I bought last night is 24" X 48" and it will be permanently mounted to that. I had to give Martin his 6" corners back so I'll have to order another set, but the outside corners will be set later this evening. Lane 3, the qualifying lane, will be 103" laps or just over 8 1/2'. With polymers the cars will really crank but the drivers skill must be at their peak to hold the corners, and acceleration becomes the key instead of top speed. Getting a car to hook up and not deslot isn't an easy task.

So the question is: When is small too small.

Doctor Phil-in-the-slot says; If you truly love your slot racing hobby then size doesn't matter. :o :tongue:
When is small too small?
4 9" turns making a donut? :freak: :p

I think it depends on the style of car you like.
Up here we run nothing but Polymer Modifieds (R/O) cars,and they like a longer style track,but if you're into T-jets and their like,then a shorter track is definitely okay.

I would have to agree with Hornet. I just built a 3x14 foot oval. Magnet cars are fun, but T-Jets are boring. Before the oval I had a much smaller Daytona Road Course set up. It was much more fun with the slower cars, but not the magnet cars.
Greg

4 9" turns making a donut? :freak: :p

That's called a skid pad.

I think 'ol Martin summed it up the best way today when he told me that as long as the track required the use of drivers skill, no track could be too short or too long.

I have a small slot room that houses my 8x11 dogleg. It's just big enough so that you have to move your head and pay attention. I sponge painted the bare board with a couple different green shades and fogged some bombcan brown and grey for some earthier spots. The green was fogged with some bomb yellow that had a bad nozzle. It looks just like acres of meadowy dandelions.

The grandkids love it. So so do I. It's just a lil' lock and joiner rattler. It's great for testing with some good straight aways and some tight turns.

Sure I'd like to unleash forty years of model railroad landscaping experience on a new train/slot combo layout. I'm realistic about my available space at the moment, and the knowledge that a routered set up is in my future. For now it's about the size of the fun in the track, not about the size of the track being fun.

I spent part of a summer living in Trenton as a teenager, about a mile from the speedway, I went to a couple of races there in 1975. I was more interested in swimming in the infield lake than watching the Champ cars run back then, especially since there was a redhead named Monica in a bikini in the lake too. BTW, Gordon Johncock won the race, I did remember that much.

Anyway, for you youngn's Trenton had a dogleg in the back straight, and it gave the Champ Cars a devil of a time. I don't remember who it was, maybe Sneva, but he spun in practice every other lap going into turn 3. This went on until he finally smacked the wall. I've only raced on one slot car track of the same configuration...with the same results.

I have raced on every type of circuit. That my favourite is 233' long and fills a gymnasium, my second favourite was 210' and the third was 201' plus the one track I would kill to run on is the KSR whilst the Ferndale tracks do zero for me, should tell you how I feel on this issue!

Who would not want to run on this if the could?

http://www.bradstracks.com/pics_of_tracks/Katzspa01a.jpg

Yes I'd love to run the katz-spa-ring...even more...I wish I had gotten the chance to meet greg...

Yeah :::slobers::: that is a nice track. I like the monorail, very cool.

I'm realistic about my available space at the moment


See, that's the issue I have... I WANT a huge track.... but my available space is just not that great. Currently, I have my table built (been done a couple years actually) but no track setup at my house. I have all of the Tomy track, the plans, and I've had it set up before...just not powered.

I REALLY want to get crackin' on it......but the table always gets used for some odd chore....be it ebay pics,ebay packing, or just a general catch all.

I have some more pressing financial obligations that I hope to have taken care of within a couple months...and then hopefully I can get the power supply that I desire, and begin constructing my track. for now I have to be content with running on my friend Max's layout.

I have raced on every type of circuit. That my favourite is 233' long and fills a gymnasium, my second favourite was 210' and the third was 201' plus the one track I would kill to run on is the KSR whilst the Ferndale tracks do zero for me, should tell you how I feel on this issue!

Who would not want to run on this if the could?

http://www.bradstracks.com/pics_of_tracks/Katzspa01a.jpg

Ya just had to post this one! Didnt ya? :p

can't find a picture of the Derby 24hr track, so had to ''settle'' for one of the KSR!

can't find a picture of the Derby 24hr track, so had to ''settle'' for one of the KSR!

Here ya go Dean --

http://photos.hobbytalk.com/data/500/HOLM.jpg

I like big tracks too; here's mine again, a work in progress --

http://photos.hobbytalk.com/data/500/Deckertring2007-_053b.jpg

'doba

And this is one of the times I set up an HO Monza circuit. This pic is from 2004, when we ran the race at night in September --

http://photos.hobbytalk.com/data/500/Monza2004-0003b.jpg

Here's how it looks in the Tracker 2000 program:

http://photos.hobbytalk.com/data/500/HOMonza.jpg

'doba

'doba, what's the dimensions of your track, looks to be a 6' X 18' maybe?

'doba, what's the dimensions of your track, looks to be a 6' X 18' maybe?

Close, 8' x 16' -- Hence all the straightaways in the middle (easier to marshall with turns near the edges).

'doba

I think we definitely all like big tracks... But when you must rely on small spaces only, you do the best possible and have pleasure with small track too.

My tiny foldable track is a fun to run (especially with slower cars)

http://slotcar.zanzaman.com/images_tracks_big/Zanzadvoort/trackzanzadvoort.jpg

More pictures of it available on my website (http://slotcar.zanzaman.com/tracks.html)

I think we definitely all like big tracks... But when you must rely on small spaces only, you do the best possible and have pleasure with small track too.

My tiny foldable track is a fun to run (especially with slower cars)

http://slotcar.zanzaman.com/images_tracks_big/Zanzadvoort/trackzanzadvoort.jpg

More pictures of it available on my website (http://slotcar.zanzaman.com/tracks.html)

I must admit I do a school fete each sumer, running F&F X-traction on a 6' x 2' table and it is fun.

What software do you use for your track plans Zanza?

If you'd like long straights on a home track, check out mine. Hopefully, the pictures will download. The backstretch straight is 24 feet long.

Bob Weichbrodt
"Rawafx"
W-S, NC

Here are a few more pictures. A couple are of my 85 year old mom running a G3 Modified. One of the pictures is of her running the car down the backstretch for the first time. Her exclamation was (quote) "Holy $#&!"!!! {Yes, my mom can cuss like a sailor!}

Bob Weichbrodt
"Rawafx"
W-S, NC

:lol: :lol: Slot cars and cuss'n, your moms the coolest!! :thumbsup:

Hey Tycoarm,
She lives in your neck of the woods....Peotone, Illinois.
There is a car show in downtown Peotone every last weekend in July and she goes every year just to socialize and check out cars. I am attaching a photo of her in my car with me(unfortunately you can't see her) during a "burnout expedition" at the car show. We didn't do the smokiest burnout, but we did do the longest(all the way to the end of the block!!!), which got the crowd on their feet cheering like crazy.

Bob Weichbrodt
"Rawafx"
W-S, NC

Bob the pic of your Mom and the Quaote would be a awesome tshirt Ad for a G3 lol.. love it...


Dave

Bob,you still feeding the bottle to this stang,i seem to remember something about this being the second mustang lately :wave:
Way to go on the Mom involement,when we were kids still living at home,my Mom used to join us racing :thumbsup:

This Mustang is a 2002 Roush 360R(built by Jack Roush Racing). It has a Eaton Supercharger on it. It's putting out a little over 400 HP with the mods I have done. My previous Mustang (a '96 GT) was bottle-fed and loads of fun, but it didn't compare to my current one.


Bob Weichbrodt
"Rawafx"
W-S, NC

...What software do you use for your track plans Zanza?

These are only elements I've found long long time ago coming from Brian Ferguson (Fergy) late website. It's not really a software for calculating, but I liked the look of the items and it doesn't look like the usual software elements.
Now I use, if really needed, a program called RailModeller which has a good selection of Tomy/Tyco elements and which runs on OS X as I'm a Macintosh user.

Whoa! Just a sec!

:lol: :lol: Slot cars, a cuss'n mom, Mustangs & burnouts,

You & your mom are the coolest!!

Back in '93 we built this 4 X 8 portable 4 lane Tyco to take to Talladega. It ran from the generator. It was small and simple but it was a blast to race on and people from across the track were later heard talking about the fun they had racing on it. We were hoping the Goodyear blimp would catch it on TV but it was really overcast that year and there was no over head camera coverage. :rolleyes:

http://www.planetofspeed.com/galleries/Talladega92/talladega6.jpg

http://www.planetofspeed.com/galleries/Talladega92/talladega13.jpg

I think 'ol Martin summed it up the best way today when he told me that as long as the track required the use of drivers skill, no track could be too short or too long.

I'll go with that! I'm having a blast with a 24' track, and I think I'd have fun with a smaller track. One of the cool things about HO is the tracks are small enough, you can fit more into a space. So you can do a trio of road courses, a large banked oval, and a small oval, and then you can run a road course series, a NASCAR/IRL series, and a Sprint/Modifieds/Legends series... all in one space!