Long over due but finally here. Windtunnel Racing Products and Murdock R/C (hobby shop) are now www.windtunnelracingproducts.com (http://www.windtunnelracingproducts.com)

The site is still under construction but is up and running. But, we are only a phone call or email away to answer any questions you may have. Personal touch has made things what they are and I intend to keep it that way but yet offer the convenience of 24hr shopping. Check it out and Check back OFTEN because things are being added in many areas and New Windtunnel Products are in production or on the drawing board soon to be started.

New lower tire prices are in place as well with new compounds coming soon

Hope you like it and it works out good for anytime ordering.

Thank you everyone for your support.

Rob Murdock
Owner:Windtunnel Racing Products

nice job Rob! :thumbsup:

Thanks Jimmy24.


I always encourage the use of your LHS or tracks for purchase of windtunnel products. Without the tracks and shops none of this would be possible. The first link in my signature will take shops and tracks to the page where they can purchase windtunnel products. If your track does not currently stock Windtunnel......ask for it. If they do not deal with the current distributors listed they are welcome to contact us directly..

like the new site rob

It's about time Rob.......LOL, Looking good :thumbsup:

congrats rob, good luck to you

Thanks everyone. Im a little old fashioned but finally decided to build the shopping cart to make ordering easier for everyone. We are building as quickly as possible and new items will be added daily in several areas.

New springs are in testing but dont forget about the rest. Windtunnel springs have become the industry standard and are widely used in kits or oem

Here are some naked shots of the WT #2392 ASA classic Firebird late model. Ill be pulling these soon as the weather starts to warm up and we go outside. this is a killer looking body for those who appreciate a little more classic late model look.Proline Toyota bodies due in the first part of next week as well. I should have them up on the website by tomorrow and you can pre-order if you like

Here are shots of the WT #2326 viper late model. Again they are naked but it is also a killer body.


Side dam kits will be available soon as well for all late models

Stay tuned for more bodies to be released in the near future. 7 more are just around the corner and yet more on the drawing board.

Hey Rob,

Can I get this in 1/4 scale size...LOL.

Great work man...great work!

Tim


Here are shots of the WT #2326 viper late model. Again they are naked but it is also a killer body.


Side dam kits will be available soon as well for all late models

Stay tuned for more bodies to be released in the near future. 7 more are just around the corner and yet more on the drawing board.

Nitro, if I could I would but the molds for a 1/4 scale are a little big for the pullers. The late models would be awesome in 1/4 scale size though. through side dams and all that on them and wow would that be cool.

Rob

New web site looks great!!!

Thanks Nick. Im trying to make navigation easy and easier. As soon as we have things in Im going to hopefully have time to break it down further so that not only do I have the manufacture link but simple links like "motors" that will bring alll manufactures up.

What are the duros on your Pink vs. Soft Pink tire?

Soft Pink 30+
Pink 35+
Double Pink 38+

Thanks for your help Hydro

Here is a link to the tire guide. I should have this all up on the new site very soon for everyone

http://members.willinet.net/bmurdock/MURDOCKRC/TIRE_GUIDE.html

Rob @ Windtunnel

Rob, new web site looks great !!!! Hope you guys come out to play at Triclone this summer.

Thank you. I sure hope to make triclone this year. Without a doubt one of my favorite tracks I have ever been on. Plus I really enjoy the competition that all you guys bring out.

I sure like my two Iowa tracks as well. MR. Car and IROAR outdoors are great. And the competition and guys that race there are a great group. I dont know for sure what my scedule will be like this summer but I hope to make it to all of them this year.

Rob

We are going to try to make it down to one of the tracks in your area also this summer. Any suggestions?

You cant go wrong with either Iowa track. Mr Car in Marshaltown is narrow, fast and challenging. It is a track you will have a love/hate with. if you run good you will love it, run bad and you will hate it. But even if you run bad........You will come back to beat it:cool:


Storm Steel in Cedar rapids is wide, great size and excellent banking with lots of racing room. Very fun track to race on

Both tracks are run very well, and each with its own personallity.

For everyones information that is or will be registering on the new Windtunnel shopping cart site. Mastercard, visa, discover are accepted as well as pay pal.

American express is not accepted. So if you have ordered or registered with American express you may want to change that for us to speed up delivery.

Thank you, Rob

Hakko Solder stations in stock (black)

Competition electronics 23 amp power supplies

rpm parts trays,

proline T-HD bodies

punisher hex wrenches and ti linkage from lunsford

Novak transponder power boosters

Fat boy motor screws (long and short)

All the above will be added to the shopping cart by tonight or morning. Some are already on there

Rob @ Windtunnel

Would Wind tunnel shur lube #3 Green be the same as Bolink #3? Thanks.

#4 Shur lube is close to the old bolink #3. At the time I brought back shur lube there were some dropped and some added but all are slightly different than they were with bolink. #4red will be very close to #3bolink though.

#3 and #4 are the most common in use for diffs and king pins as well as 1/12th damper tubes

Rob @ Windtunnel

Rob what do you recomend for a good diff lube. I am looking for something that makes the diff real smooth.

Shur Lube is the stuff Joe. I use #3 in omaha most of the time but the beauty of shur lube is that you have 6 to choose from the make the diff rotate as needed. Finishline and IRS are both great as well but shur lube will stay smooth longer in most cases


NEW EMAIL: ROB@WINDTUNNELRACINGPRODUCTS.COM

my aol is still active and will be for some time to come but I have begun a switch over.

Windtunnel body new approvals with ROAR:thumbsup:

1/10th Super Trucks: WT2259 & WT2272

1/12th Stock Car: WT2211 HDXjr

1/12th GTP: WT2018

Hey Rob-

Are you still doing the combo deals on the KSG kits? If so do you have any Gen 2's in stock?
Thanks
Joel White

I do still do the combo kits and Gen 2 kits and conversions are in stock. I trying to firgure a way out to get the package deals up on the new site today.

Rob

Thanks for the update. I sent you an email.

Thanks

All roads closed or travel not advised in Iowa. Orders will no doubt be delayed everyone. The weather is real bad in my area. Still snowing, blowing, large drifts, cold as all get out and doesnt appear to be ending anytime soon. Sorry for the delays.

Rob

Stay safe Rob.

Walter

______

Gray is what used to be tagged 2 Gray. The rubber these days is all getting harder it seems like and it got to be hard to split them up and have enough for both. You also have black or sliver/gray for options as well

Rob

Many updates have been added to the shopping cart. New pictures, and Products. Pictures of Windtunnel products such as Ultra spring kits, front end kits, 1/12th kits and 3 Racing Products & pictures were added as well.

OVERSTOCK SALE: Got a few more 13.5bl motors than we need right now. Special price of $75 until stock in down a bit. Price will be updated at www.windtunnelracingproducts.com (http://www.windtunnelracingproducts.com/) tonight


4300bl motors $60

Get them while you can at this price

UPDATE ON PRICES COMPLETED. 8:00 central time


Leading edge cars and parts coming soon!!!!!!!

The latest BL motor from novak has arrived. NOV#3410 10.5 bl motor. Now with blue colored timing ring, ribbed upper and lower endbell & sintered rotor. $90 entry price

rob what is the 10.5 speed wise between the 13.5 and 4300 or what???

SS10.5 Pro Brushless Motor is 10.5 turns, and similar to a 19-turn brush motor (#3410

got this from there site but ? now is what is diffrents between this and the 4300?????

oh god this is why im waiting on brushless....

10.5 is the 4300 really it now comes with the ribbed endbells and sintered rotors & colored timing ring.

Basically it is what we have been doing to the 4300 already which is adding the endbell/rotor.


13.5 is a little slower motor than the 4300/10.5

GTB 4-Cell/SS10.5 Pro Brushless System—this system is ideal for use in the 4-cell Brushless Racing League (BRL) “Pro 4300 class” races. (#3040)

thanks rob i guess i should put down the beer and read more before i post... heheheh

talked to alan behler today and said you still do the cap tire thing (i didnt see them on your site) ill call you soon to place a order..

Yes we do have BSR cap tires in stock. Im going to get those up on the website next week at some point. Havent built much on the site this week. Working on new projects and getting ready for the BRL race this weekend (when I have time).

farmers never have time theres always something to do around the farm... just wish you got paid more for all the time and hard work the farmers do

No farming going on this time of year. All Windtunnel right now keeping me hopping.:roll:


Making every effort to get Windtunnels new projects under control before farming season does hit though

rob i ordered a couple esc's tuesday night and paid express mail any idea when i'll get em? i really needed them today but oh well just let me know thanks. Brad Sousa

They were shipped overnight UPS saver Brad. You will see them today. Let me know if you didnt get that message from the website. I thought we put that in the details for you. Either way, you will see them today.

Rob

rob thanks i went to the track and they came to my house the wife ended up bringing them to me thanks alot i appreciate the fast shipping. Brad Sousa

I gotta Give it to Rob Murdock put an order this morning and it is out the door and on the way to me that's A+ Service.

can someoone please send or post a complete list of tire compounds and shore ratings wanting to try some at the roar nats in april

http://www.windtunnelracingproducts.com/catalog/index.php?cPath=42_21_78

Here is a link. Compounds and durometer/shore rating are on the new shopping cart site (fronts right now). I will have the Rears updated the first of the week but they are listed in the product description for both. Let me know if you find everything ok.


Rob