jettvolks
02-11-2007, 03:29 PM
SOLD!!!
I am in the market for a new project so this one is up for sale. Willing to sell either RTF minus a TX and battery or ARF minus all electronics. Here is what is up for sale
1 complete HDX with complete cnc narrow tail, has the white plastic tail fins and tail blades, eSky sym. main blades, blade cp pro plastic head assembly with new installed stainless feathering shaft (this head has had the blade grips upgraded to the steel balls), eSky main gear and shaft, newer style frame with the little mounting plates on the front of mainframe, shiny alum main boom, blue alum. tail servo mounts, has the white tall landing gear (I heated these a little to give a little lower and wider stance), has CF tail pitch rod (I built this unit with items from my LHS).
1 almost complete HDX frame assembly. A few scratches on the anodizing on some of the servo mounts and main mast assembly. Comes with full plastic tailcase and grips (assembled unit), main belt, blue alum mainboom (has a slight bend to it that I never tried to straighten it out). Only thing missing I can see is the main tail pulley, the motor mount, and landing gear.
Parts:
NIP full screw kit, NIP canopy mounts, NIP hardened tail shaft (pin style pulley), NIP pressed on pulley tail shaft (not sure if this is hardened or not), NIP (2) stainless feathering shafts/spindles, NIP tail fin mount/gyro mount (can be used as either), new HDX300 canopy that I never got around to mounting, tail boom supports (one needs an end reglued if I remember correctly), set of G10 tail fins, spare set of plastic main blade grips with steel balls, spare eSky main gear, miscellanous blue main gears with some misc. auto rotation bearings and hubs (these were used units I got in a package deal and they have some missing teeth on them but could still possibly be used??), I think I have a couple of mainshafts for the autorotation setup but they are ugly and I never checked them for being straight (also included in the package deal of parts I got) and I don't know if they are the hardened mainshaft or not.
Lot of spare parts and I might even have some other stuff if I do a little more digging around in my box.
Electronics currently installed on the heli are 3 Hitec HS55's on cyclic, and a Hitec HS56HB on the tail, Eflite blade cp pro reciever with deans base loaded antennea, Dymond RC 25 amp Brushless controller, eFlite 4100kv motor w/8 tooth pinion, Zoom heading hold gyro (G90 type).
http://i8.photobucket.com/albums/a1/cherojee/heli%20pics/IM001562.jpg
http://i8.photobucket.com/albums/a1/cherojee/heli%20pics/IM001566.jpg
http://i8.photobucket.com/albums/a1/cherojee/heli%20pics/IM001568.jpg
http://i8.photobucket.com/albums/a1/cherojee/heli%20pics/IM001565.jpg
Prices:
$325 RTF with all electronics installed shipped USPS Priority w/delivery confirmation
$225 ARF minus all electronics shipped USPS Priority w/delivery confirmation
I am willing to negotiate a little on price and could put it in any state of electronics installed with an appropriate price. :)
Paypal is preferred and I do not charge the associated fees. PM or eMail me for questions or offers. Not really looking for any trades at this time. Only trades considered would be heli related depending on the model.
I am in the market for a new project so this one is up for sale. Willing to sell either RTF minus a TX and battery or ARF minus all electronics. Here is what is up for sale
1 complete HDX with complete cnc narrow tail, has the white plastic tail fins and tail blades, eSky sym. main blades, blade cp pro plastic head assembly with new installed stainless feathering shaft (this head has had the blade grips upgraded to the steel balls), eSky main gear and shaft, newer style frame with the little mounting plates on the front of mainframe, shiny alum main boom, blue alum. tail servo mounts, has the white tall landing gear (I heated these a little to give a little lower and wider stance), has CF tail pitch rod (I built this unit with items from my LHS).
1 almost complete HDX frame assembly. A few scratches on the anodizing on some of the servo mounts and main mast assembly. Comes with full plastic tailcase and grips (assembled unit), main belt, blue alum mainboom (has a slight bend to it that I never tried to straighten it out). Only thing missing I can see is the main tail pulley, the motor mount, and landing gear.
Parts:
NIP full screw kit, NIP canopy mounts, NIP hardened tail shaft (pin style pulley), NIP pressed on pulley tail shaft (not sure if this is hardened or not), NIP (2) stainless feathering shafts/spindles, NIP tail fin mount/gyro mount (can be used as either), new HDX300 canopy that I never got around to mounting, tail boom supports (one needs an end reglued if I remember correctly), set of G10 tail fins, spare set of plastic main blade grips with steel balls, spare eSky main gear, miscellanous blue main gears with some misc. auto rotation bearings and hubs (these were used units I got in a package deal and they have some missing teeth on them but could still possibly be used??), I think I have a couple of mainshafts for the autorotation setup but they are ugly and I never checked them for being straight (also included in the package deal of parts I got) and I don't know if they are the hardened mainshaft or not.
Lot of spare parts and I might even have some other stuff if I do a little more digging around in my box.
Electronics currently installed on the heli are 3 Hitec HS55's on cyclic, and a Hitec HS56HB on the tail, Eflite blade cp pro reciever with deans base loaded antennea, Dymond RC 25 amp Brushless controller, eFlite 4100kv motor w/8 tooth pinion, Zoom heading hold gyro (G90 type).
http://i8.photobucket.com/albums/a1/cherojee/heli%20pics/IM001562.jpg
http://i8.photobucket.com/albums/a1/cherojee/heli%20pics/IM001566.jpg
http://i8.photobucket.com/albums/a1/cherojee/heli%20pics/IM001568.jpg
http://i8.photobucket.com/albums/a1/cherojee/heli%20pics/IM001565.jpg
Prices:
$325 RTF with all electronics installed shipped USPS Priority w/delivery confirmation
$225 ARF minus all electronics shipped USPS Priority w/delivery confirmation
I am willing to negotiate a little on price and could put it in any state of electronics installed with an appropriate price. :)
Paypal is preferred and I do not charge the associated fees. PM or eMail me for questions or offers. Not really looking for any trades at this time. Only trades considered would be heli related depending on the model.