PD2
01-23-2007, 06:56 AM
I hate to do this but I just have ZERO time to race anything any more. So I'm selling this Trinity Street Spec that I had setup for Bracket racing. The intent was to do something cheap, but yet have it setup like a purpose built dragster.
The kit is BRAND NEW! In fact, I still have the box it came with the parts, instruction manual - this thing was assembled and never run. It still needs some front skinny tires or you can run it with the included 1/12 scale foams. The one upgrade I did do to the car was installing some Lunsford steering rods up front to attach to the servo. Rolling car will be $55 shipped via USPS Priority Mail with Delivery Confirmation.
In addition, I also have an RAE ProMod body that is NIP! Its the C63 or the 1963 Corvette body - sweet body and all still new in the package ready for you to paint up. I'm looking for $25 shipped via USPS Priority Mail with Delivery Confirmation.
If you need a drag racing setup ESC I also have a Tekin TSC 410-S2 that looks brand new from the factory! It has all the heat sinks, wires, switch, and has a few nice features. It has an adjustable torque and it is also the series that featured the regenerating capabilities that would "charge" your batteries when the brake was applied. According to the documentation (which is included for setting the ESC up) these were typically rated for RC drag racing. I'm looking to get $30 shipped via USPS Priority Mail with Delivery Confirmation.
And finally, to make it almost completely ready to run, I have an Airtronics 94157 Servo. The specs on this servo is 95oz. in .06 at 4.8V. It weighs approximately 2.07oz and has a Coreless motor with double ball bearings in it. The wire lead has been professionally/cleanly shortened and works very nicely on the drag chassis. It will also come with a Kimbrough servo saver installed. VERY nice servo for ANY racing! This servo used to retail for $159.99. I'm looking to get $50 shipped via USPS Priority Mail with Delivery Confirmation.
I can definitely combine any of the above and create a "package" deal - the more you buy, the better the deal. So feel free to let me know if you are interested in more than one item.
The only trade I may be interested in would be a Losi Micro-T 1/36 truck. No other trades though.
Payment can be made in PayPal (no credit card payments and please add 3%+$.30 for fees) or by USPS Money Order. Shipping is to the 48 US States only - no Intl.
Please e-mail me at pdaigle@yahoo.com if you wish to see any pictures or have any questions or concerns about any of the above!
Thanks for looking!
PD2:thumbsup:
The kit is BRAND NEW! In fact, I still have the box it came with the parts, instruction manual - this thing was assembled and never run. It still needs some front skinny tires or you can run it with the included 1/12 scale foams. The one upgrade I did do to the car was installing some Lunsford steering rods up front to attach to the servo. Rolling car will be $55 shipped via USPS Priority Mail with Delivery Confirmation.
In addition, I also have an RAE ProMod body that is NIP! Its the C63 or the 1963 Corvette body - sweet body and all still new in the package ready for you to paint up. I'm looking for $25 shipped via USPS Priority Mail with Delivery Confirmation.
If you need a drag racing setup ESC I also have a Tekin TSC 410-S2 that looks brand new from the factory! It has all the heat sinks, wires, switch, and has a few nice features. It has an adjustable torque and it is also the series that featured the regenerating capabilities that would "charge" your batteries when the brake was applied. According to the documentation (which is included for setting the ESC up) these were typically rated for RC drag racing. I'm looking to get $30 shipped via USPS Priority Mail with Delivery Confirmation.
And finally, to make it almost completely ready to run, I have an Airtronics 94157 Servo. The specs on this servo is 95oz. in .06 at 4.8V. It weighs approximately 2.07oz and has a Coreless motor with double ball bearings in it. The wire lead has been professionally/cleanly shortened and works very nicely on the drag chassis. It will also come with a Kimbrough servo saver installed. VERY nice servo for ANY racing! This servo used to retail for $159.99. I'm looking to get $50 shipped via USPS Priority Mail with Delivery Confirmation.
I can definitely combine any of the above and create a "package" deal - the more you buy, the better the deal. So feel free to let me know if you are interested in more than one item.
The only trade I may be interested in would be a Losi Micro-T 1/36 truck. No other trades though.
Payment can be made in PayPal (no credit card payments and please add 3%+$.30 for fees) or by USPS Money Order. Shipping is to the 48 US States only - no Intl.
Please e-mail me at pdaigle@yahoo.com if you wish to see any pictures or have any questions or concerns about any of the above!
Thanks for looking!
PD2:thumbsup: