jbell31
05-24-2007, 09:43 PM
That was a big hit. How the heck do you bend the bottom of the frame?
|
View Full Version : QSAC Sprint Dirt National jbell31 05-24-2007, 09:43 PM That was a big hit. How the heck do you bend the bottom of the frame? jbell31 05-24-2007, 09:47 PM Randy Baker was driving that thing like that? holy smokes!!! Had to be more than a hand full. Gives a whole new meaning to tweek...:roll: big maestro 05-24-2007, 09:48 PM I don't know but when they hit you could hear it. The wreck was behind me and when I heard the "thud" I turned around to see the two cars. When I made it over to them the frame was all the way back to the axle. I carried the car over to randy because I thought it was done. Well he proved me wrong. He finished the race in 2nd and was really running strong with it bent like that. Here is a front view. http://photos.hobbytalk.com/data/510/IMG_01731.jpg FMurry8995 05-24-2007, 09:50 PM That was a big hit. How the heck do you bend the bottom of the frame? You run into an object at a very high rate of speed. Nasty looking frame wouldn't you say. It will live again. Just not as soon as planned. Randy has already clipped the front end and is getting it ready for paint. Lance: I mean Jim: Thanks for the instructions. Fred :wave: big maestro 05-24-2007, 09:55 PM You run into an object at a very high rate of speed. Nasty looking frame wouldn't you say. It will live again. Just not as soon as planned. Randy has already clipped the front end and is getting it ready for paint. Lance: Thanks for the instructions. Fred I cant take credit for the instructions. I did'nt get to you in time. Plus Jim had a better description than I would have. :thumbsup: Did anyone find out the times in the A? Also Did anyone ever find out the actual speed we were running? 585 feet in 10.5 seconds. How do you figure that? jbell31 05-24-2007, 09:57 PM Randy said: Gonna be a few hours spent in the garage this week to fix the carnage , frame was hurt very much bad, Kind of an understatement... I'd say busticated beyond belief. bbb for short, which is the sound I would make in the aftermath of something like that. bbbbb bbbb bbb bbbbb Ouch!!! FMurry8995 05-24-2007, 10:04 PM I cant take credit for the instructions. I did'nt get to you in time. Plus Jim had a better description than I would have. :thumbsup: Did anyone find out the times in the A? Also Did anyone ever find out the actual speed we were running? 585 feet in 10.5 seconds. How do you figure that? Lance, you are correct and I do apoligize to Jim. Often my brain does not work proper or at all. It has gotten as lazy as I am. Jim: Thanks for the instructions on photo posting. There, Yes, That's what I was thinking just not typing proper. :wave: Fred butchman 05-25-2007, 09:42 AM If,and thats a BIG IF, my calculations are right,585ft in 10.5 sec=3510ft in a minute.3510x60(1hour)=210600.0ft in 1 hour divided by 5280ft in 1 mile=39.88mph. Which is moving!! :thumbsup: Scale would be 39.88 x 4=159.62mph scale?? Don't quote cause I'm old and my mind wanders,good thing it does'nt leave for good!! Butch :wave: IN2RACIN 05-25-2007, 10:06 AM The fastest lap in the A-main was John Pipchok 10.657. TQ was 10.568 (I think). Randy Baker 05-25-2007, 10:31 AM Hi guys , well the frame is repaired . I ended up clipping the frame from the radius rod mounts forward . Only thing salvageable frame wise was the right front shock mount . Also lost a servo saver on the left front , bent a steering link and radius rod on the right and broke a 1/4 " hiem . Nerf bars are junk . Udder fer that IT will live to see another day . Was hoping to have it ready for Cedar Rapids this weekend but I won't make it . Have alot of parts to clean and check out and put it all back together . For all of you that are going racing this weekend good luck and have a safe trip . Randy Belf28 05-25-2007, 11:11 AM Hi guys , well the frame is repaired . I ended up clipping the frame from the radius rod mounts forward . Only thing salvageable frame wise was the right front shock mount . Also lost a servo saver on the left front , bent a steering link and radius rod on the right and broke a 1/4 " hiem . Nerf bars are junk . Udder fer that IT will live to see another day . Was hoping to have it ready for Cedar Rapids this weekend but I won't make it . Have alot of parts to clean and check out and put it all back together . For all of you that are going racing this weekend good luck and have a safe trip . Randy congrats on your second place finish and top3 in qual randy :thumbsup: . i had a great time... glad i got to meet you and pit near ya was fun. cya again soon jamie Belfiore :wave: IN2RACIN 05-25-2007, 01:56 PM I cant take credit for the instructions. I did'nt get to you in time. Plus Jim had a better description than I would have. :thumbsup: Did anyone find out the times in the A? Also Did anyone ever find out the actual speed we were running? 585 feet in 10.5 seconds. How do you figure that? Hi Lance - The track was made bigger about 5 weeks ago. I was told that the run line is 600 feet. Are you coming back to race with us this year? :-) SG IN2RACIN 05-25-2007, 02:01 PM Also, I was told that the dvd's from the QSAC Sprint Dirt Nats will be ready late next week or so. He said there is some AWESOME footage. Contact Wayne to preorder. wnlawyer@gmail.com big maestro 05-25-2007, 07:47 PM Hi Lance - The track was made bigger about 5 weeks ago. I was told that the run line is 600 feet. Are you coming back to race with us this year? :-) SG If You are running on a weekend I have to move my little sister then I will definetly run again this year. She is going back to WVU so I'll be right down the street. As far as a regular weekend race I dont know. That is a LOOOOOOOOOONG trip. Thank goodness Kristen helped with the driving. But who knows I may get a wild hair and haul but up there. :p I know I had a blast. I emailed Wayne lastnight about a DVD. A few of my friends here want to see it. I'm going to try and talk them into a sprintcar. :thumbsup: tholloway 05-26-2007, 02:39 AM I would also like to thank everyone for a great weekend. Can't wait to come back. Thought I had something while leading until the mid way point when I got turned and t-boned. Oh well I was happy the car finished as bad as it was hurt. There was a lot of good racing and and a ton of good bench racing. I whish that I would have got mine handleing before the last minute before the heats started. I would have a lot less clean-up to do. lol Scott you need to do this again. Cant wait. Thanks Todd Holloway#2 IN2RACIN 05-27-2007, 10:28 AM If You are running on a weekend I have to move my little sister then I will definetly run again this year. She is going back to WVU so I'll be right down the street. As far as a regular weekend race I dont know. That is a LOOOOOOOOOONG trip. Thank goodness Kristen helped with the driving. But who knows I may get a wild hair and haul but up there. :p I know I had a blast. I emailed Wayne lastnight about a DVD. A few of my friends here want to see it. I'm going to try and talk them into a sprintcar. :thumbsup: Hi Lance - When will you be coming to WVU (dates)? big maestro 05-27-2007, 11:46 AM I don't know the exact dates right now but I know it is in Jul. or aug. When I find out for sure I will definetly let you know. I hope the next time I show up there I will have a latemodel to test. :) IN2RACIN 05-27-2007, 12:38 PM July 21st we race, its a "twin 25" event too. August 25 is race date also. Let me know. BIGKAHUNA 05-27-2007, 11:05 PM you guys have to come to freddies hobby and run your sprints. the track is really fast. i should have mine ready to race middle of june. 1/4 scale nascars are great should come and see them run on saturdays. IN2RACIN 05-28-2007, 10:15 AM I don't know the exact dates right now but I know it is in Jul. or aug. When I find out for sure I will definetly let you know. I hope the next time I show up there I will have a latemodel to test. :) A latemodel? ..hmmmmmmmmm.. Tell me more... Randy Baker 05-29-2007, 06:13 PM congrats on your second place finish and top3 in qual randy :thumbsup: . i had a great time... glad i got to meet you and pit near ya was fun. cya again soon jamie Belfiore :wave: Thanks Jamie , sorry I didn't get back to you sooner , been a little busy . Got to agree with ya , we did have some laughs . Bench racing was ok too . Randy butchman 06-05-2007, 06:24 PM Scott, just read the QSAC news letter,great job on the dirt natioal coverage,looks good :thumbsup: how about them guys out west,amazing turnout huh?could you amagine that many sprints?You'd have a week long race :) :) Butch IN2RACIN 06-09-2007, 08:48 AM Also, I was told that the dvd's from the QSAC Sprint Dirt Nats will be ready late next week or so. He said there is some AWESOME footage. Contact Wayne to preorder. wnlawyer@gmail.com Hi All, The DVD from the QSAC Dirt Nats is AWESOME! I watched it last night. They are ready to ship. $15.00 plus shipping. It is VERY VERY nice! (Contact Info. above.) KevinBahr 06-09-2007, 02:18 PM Scott, This is Kevin Bahr from Michigan. We talked a while ago. Just curious if the contact person that is doing the DVD's takes paypal or not. Let me know ok. Would love to get a copy of this. Kevin IN2RACIN 06-09-2007, 07:12 PM Scott, This is Kevin Bahr from Michigan. We talked a while ago. Just curious if the contact person that is doing the DVD's takes paypal or not. Let me know ok. Would love to get a copy of this. Kevin Hi Kevin, I'm not sure if Wayne takes paypal or not. Just email him and check. What have you been doing? Are U racing? SG IN2RACIN 06-10-2007, 11:04 AM He does not take paypal for sprint dirt national dvd. sorry. KevinBahr 06-10-2007, 02:54 PM Scott, I still have my 1/4 scale sprint car, but I am now racing more just here in Michigan doing the 1/10 scale dirt outlaw late models. Wow what a blast that is. Other than that not really doing the 1/4 scale thing any more. Kevin IN2RACIN 06-21-2007, 05:54 PM Hi All, The DVD from the QSAC Dirt Nats is AWESOME! They are ready to ship. $15.00 plus shipping. Contact Wayne to order. wnlawyer@gmail.com 724-375-7692 Thanks, SG vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.
|