A real quick THANKS to Rick White and the FINISH LINE crew for coming on board to the SWT (South-West Tour) Series for '07.

We'll be using the TRINITY Ultra-Bird 19t motor EXCLUSIVELY with the "F" Brush next year to get control on the 19t class.

Some of the racers were skeptical about these motors, but so far the 2 guys who have tried them have both set TQ's and WON those races against the regular adjustable timed 19t motors.

They both had the same comments... "The Amp Draw was lower than their regular adj. 19t motors, but these thing PERFORMED on the track"

Thanks Rick for the best stock brush on the market!not to mention the awesome front axles! put them in the 4300 car and shot right to the A main!

Jody Miller

Same hear on the brushes, Love the brushes but I didn't get any of those AXELS. Sure would have been nice! LOL

Thanks to Rick for the brushes and axles but most of all for the many Laughs, You are one funny man......Hope to see you in Greeneville at the ROAR race..............Hitman

i have been running the F brush for a long time now and it provides awesome power!!!
i had the fastest car at the end of the A main at the biggest race of the year and my buddy did a 52 4:00 in the C main which was fast enough to run way up front in the A main

thanks rick

alan behler
rip motorsports
jbr cells
t/m tires
finishline
orc

I've been running the New front Axles, These things are Awsome!!!! :thumbsup:

Thanks Rick for the Laughs all week, Those new front axles Are AWESOME Put them in the 19t car and with the beating I took early in the week they held up. :thumbsup:

Gotta say thanks to Alan B. My brother bent a Finshline axle in a wicked wreck in a heat race yesterday. The hobby shop was all sold out of them. Alan and I were talking set up when my brother came over to me and said to me the hobby shop was out. Alan had seen what it was, and gave one to my brother. My brother and I have to give a big thanks to Al. Thanks for keeping my brother in the racing program yesterday Al. And thanks for helping us out with setup and motors.

Gotta say thanks to Alan B. My brother bent a Finshline axle in a wicked wreck in a heat race yesterday. The hobby shop was all sold out of them. Alan and I were talking set up when my brother came over to me and said to me the hobby shop was out. Alan had seen what it was, and gave one to my brother. My brother and I have to give a big thanks to Al. Thanks for keeping my brother in the racing program yesterday Al. And thanks for helping us out with setup and motors.

anytime bud

thanks again rick,F
F brushes rocked all day
finished 1 2 3
keep it up

alan behler
rip motorsports
jbr cells
t/m tires
finishline
orc

i have been using the "F" brush for awhile now and it seems to be working out really well for me,
Thanks for the awesome product,
CDW

wow is all i can say for you guys at finish line racing products.... thanks to alan and the f-brush ( that we have been running for over a year now) i have had the most fun in rc that i have ever had do to not needing to play the brush of the day game.... and alan thanks for the time and effort that you put into are motor program...

also in the past 2 mo i have run your t-plates and have to say they are works of art. and never have to worry about it because it shows with your quality control its top notch everyone is the same and thats refreshing to know...

also looking forward to getting my hands on the new ft axles soon.

keep up the great work and products...

brock garis

Rick: Thanks for the .125" axle samples you gave me at the Snowbirds... just built another front end with them and I noticed that they are harder and heavier than the previous ones I've been using. Should be tougher to bend as well...I'll let you know how they hold up...

Thanks again.

Todd....Your welcome


Rick White

Where can I find a visiual of the various spring steel t plates?

I have some new in the package with no description as to firm, soft med or what.

Ive never had a finishline soft plate..But I know my Finishline firm plates have a small Triangle cut into the center of them, and the medium ones have a double slot...

if you would like to see pics of the t plates go to http://finishlinerc.com/ rick your brushes and other hardware have been keeping me out front for a while now. keep up the good work. and i need to get my hands on some of those axles!!!!!!! Brad Sousa :thumbsup:

Solid - no hole - Stiff
Triangle - Firm
Oval - Medium
Double Slot - Soft

I think the site has the oval as softest but the double slot always felt softer to me.

Solid - no hole - Stiff
Triangle - Firm
Oval - Medium
Double Slot - Soft

I think the site has the oval as softest but the double slot always felt softer to me.

Double slot I believe is called Medium but I agree with you the double slot seems as soft if not softer then the oval....

Brad, thanks, that just what I was looking for!!!!!

Any particular brush treatment seem to be working better
than others on the Cobalts?
ie, full, slot, cavity, etc??

thanks.. Dan

dan, i've had my best luck putting medium sized hole in the face with the putnam drill jig.and cut .010 to .015 off the left side of the brush and .005 off the right side of the brush. this is while looking into the brush hoods when sliding the brush in left and right. trailing and leading. use putnam or zubak comm drops i prefer putnam 2 drops on each back side of the brush with brushes installed. oil bushings and break in for 400sec at 2.5 volts. look for 7 to 8.5 amps if amps are more then 8.5 try taking a little more off the right side of the brush or gently round the right edge of the brush with sand paper or file. very carefully. after 2 runs recut comm leave brushes alone oil it put the 2 drops and re break in for 250sec. and your good to go. i picked some of this up from eric salvas using putnam brushes and tuned it a little to find the right spot for f's and it's been working great for me for along time. trust me i buy these things buy the 100's. hope this helps let me know how you make out. Brad Sousa :thumbsup:

Thanks, Brad...
r-u racing York Sunday?

no not going to york racing starting at midnight saturday so no way of making up there i will be there in the next few weeks though. if you need anyother help feel free to shoot me a e mail or whatever. but i hope it helps i'll cya soon, Brad

Rick I wanna thank you for your support you have some great product. :thumbsup:


Kevin Henson
Finishline
Power Push
PRS
KND Concepts
TEAM 1 R/C

Jeff Sears Memorial Race:

Finish Line takes 1st place Pro b-main, b-main due to rough heat, ran 3rd fastest overall in the main!! :thumbsup: (Great Product)



3wide

That motor ran pretty strong, 3wide it was the same motor that won the 12th scale A main also. Thanks for the great product.
See ya,
Fireball

The RC-Oval .09 Nitro Series is proud to announce that Finish Line has come on as one of our Series sponsors. We look forward to having them for the 2007 season.

f-brushes rule! thats all i have to say about that.

thanks rick.

My brother want to get a komodo and run some f brushes in it. I was wondering what you guys look for amp draw and do you drill a hole, time the brush?
Thanks,
Fireball

Big thanks to Rick White. I know of 8 in the A-main that were on the "F" laydown brush including Jody Miller who TQ'd and won.

Thank you very much for all that you do for the sport and for supporting EA Motorsports, Jody Miller, and myself.

Tony Moffre
PRS
EA Motorsports
Hyperdrive
Finishline
IRS
Parma/Faskolor
Pro-Built

rick thanks for the support and making the best stock brush on the market by far..not to mention the best front axles..man those are sweet...the "F" brushless car was dialed! lol


Jody

...so FINISHLINE now has

1/8" front axles
Front Suspension Springs
....rear Suspension Springs?
Spring Steel T Plates (Which I got to run the KSG Gen2 Offset friday night)
Awesome lubes, oils and comm drops.
Great "F" Brushes
Break-In Fans and MORE

WHAT'S NEXT???

Joe Myers
South-West Tour "R/C Oval Series"

http://www.southwesttour.com/images/tour/smtourlogo.jpg

Official 'TOUR' Sponsors

FINISHLINE R/C Products (http://www.finishlinerc.com/)
Jake's Performance Hobbies (http://www.jphracing.com/)
Maverick Oval Chassis (http://www.swiftracingproducts.com/)
McAllister Racing Bodies (http://www.mcallisterracing.com/)
STICK E.T. Tire Sauces (http://www.arcor-rc.com/arcor2003/sticket.htm)
T.M. Racing Tires (http://www.tm-rc-racingcomponents.com/index.htm)

WWW.SOUTHWESTTOUR.COM (http://www.southwesttour.com/)

Hard to say what ol Rick has up his sleeve. Great Guy and Great Products and always willing to help anybody out !!

Hard to say what ol Rick has up his sleeve. Great Guy and Great Products and always willing to help anybody out !!

x2 axels and springs are great!!!!

I would like to Thank everyone that used my products at the nationals. congratulations to Jody Miller on his win in stock & 13.5, now if we can figure a way to make it work in the F-brushless car,i'm sure it would be faster

Rick White

I would like to Thank everyone that used my products at the nationals. congratulations to Jody Miller on his win in stock & 13.5, now if we can figure a way to make it work in the F-brushless car,i'm sure it would be faster

Rick White
Great products like normal. Thanks for all your support. Jeff Carapellatti

THe f Brush is awesome,Do u guys notic a difference in the treated f brushs i saw them and people tell me they are faster just wondering


Ian Vrana
Team Powerpush

I don't know who or how they are treating the brush, I would like to see what they are doing

Rick White

I don't know who or how they are treating the brush, I would like to see what they are doing

Rick White

I treat our brushes, treat them to a win in Millers car! lol

rick i used finish line t-bar ft axils and brushes in every motor i ran this weekend to tq and win a rain shortend customworks del champs on sat

on sunday started 2nd behing alan and took the win in the orl race... (thanks for the lift al)

brock garis

now you got to get you some of them new FINISHLINE front springs and you will be set :thumbsup:

now you got to get you some of them new FINISHLINE front springs and you will be set :thumbsup:

hey mike they were on my car :thumbsup:

thanks again rick everything was awesome

Brock hook on Comon

Hey Rick Just wanted to say thanks for supporting the Dog Race @ MTR the brushes went over well.

Hey Rick Just wanted to say thanks for supporting the Dog Race @ MTR the brushes went over well.


I'll second that. Do those brushes ever wear? Since it was a handout motor race and racers were limited to one motor, I ran the same set of brushes for about 4 or 5 practice packs and with just a reskim of the comm about every other run, The serations were still there and I ran my fastest laps in the main in the hottest part of the day and the brushes still look almost new.

I'll say one thing about them, Getcha'some!:thumbsup:

A big thanks to Rick White of finishline Rc ...His T Plates were awesome this weekend at the Nats ...Finished 2nd in Mod in My car...And were in many more ...Thanks Rick ...

Finishline products helped Jody TQ and win stock, 2nd in 13.5, and 2nd in .09.

Finishline products used in all 3 cars:

Double slot steel t-plates
Front axles
Ceramic Bearings
Ceramic diff balls
F-brushes (in 13.5 and .09 as well lol lol lol)

Thanks for your continued support Rick. Look forward to seeing ya at Greeneville!

Good job at the nats Humpty & Jody and to everyone that was using my products
Thank You

Rick White

Hey Rick,

Send me an e-mail with your number or give me a ring.

tony@precisionracingsystems.com

704-754-6609

Rick Thanks for all your help and support. F brush takes another title and the F brushless brush comes in 2nd!lol now we just need to come up with something for the .09 motor!haha