New goodies are in stock from 3 Racing. Ball end removers, pinion rack (also camber guage & pinion sizer), Automatic Tire truers

$15.50 Pinion & Camber guage
Nifty little item here. they will hold pinion gears, measure pinions in 64 or 48 pitch. Up to 45 tooth on 64p or 48p, Plus will measure camber up to 3 degrees. Available in Titanium, red, blue, and black

$9.00 Ball end remover
Nice tool for popping ball ends off your steering blocks. Available in black, purple, titanium, & red (not available, they didnt ship it)

$235 Auto tire machine
Again, nice nice machine. Full auto like many of the other machines on the market. I have tested this machine and found the power to be excellent and trouble free in testing. This machine will tapper both ways and has a neat edging option with it where you can set the edger and simply pull a lever and edge your tires. Also come with a touring arbor, padded case, allens, extra blades, sand paper for edger. This machine will also accept the carbide cutter I sell (MM marking are off though) but the way they have the blades set up it cutts better than any standard blade on any machine I have ever tested. Any other questions on this machine ask away but it is very nice and in testing has been durable.

MURDOCKRC@AOL.COM

Rob you are THE MAN!! Ive been trying to get one of these tire truers for a while now. When will you have them in stock? Will they wack a tire down from full size on 1 pass like a Hudy?

Also need to get some 12th scale springs from ya...going to be running some 12th on road nad need to introduce some of those guys to WT Racing produts!!

EA

Everything listed about is already in stock EA and yep, that machine will saw through purples as deep as you want to go with no trouble. The only downside if you want to call it that is that when you use the carbide cutters that I sell the MM markings are not even close. But, the cutter does fit and works great with it.

Rob Is the truer 12v or 110v?

Thanks

RC

The tire machines are 12 volt

Rob, what is the cost for the carbide cutter for the tire truer machine?

Carbide cutter that fits all the auto machines is $35.99

Rob, you have a PM

Rob, can you get the ride height tools also?

Onefastdude: my PM is not active. shoot me an email at MURDOCKRC@AOL.COM


VWAL, I did not bring in the ride height guages on this order because I have the integy stuff in stock and they are all but the same. If you would like one of the 3 racing though I can certainly get some on the next order.

Rob