Does anyone have a starting setup for the new KSG slider chassis?
And which tires do you use with the setup?

what kind of track and what class?

What would it take to see more "Set-Up" info on this site for the KSG Gen 1 and Gen 2 cars?

It seems KSG info is hard to find, not only here but even on the KSG web site.

Flat Asphalt w/ FOAMS

Carpet

Banked w/ Caps

Banked w/ Foams

Set up Photos...

Racer Ron,

I posted a setup that seems to work well for medium to short carpet tracks on the KSG website. Base stays pretty much the same and then I tune with tires depending on traction and how tight the corners are.

Let me know if you can't get it there and I'll send you a copy.

Martin Paradis

Can someone fill in the blanks ???? I have recently gotten a set of the dual rate springs and there is no way to tell exactly what spring is which. Could someone post a list of color and rate here ????

Here you go....

http://www.hobbytalk.com/bbs1/showthread.php?t=160236

Thank you so much now I can get them in for this weekend with some idea of whats going on.

I run a KSG get 2 on a flat carpet track about 130 ft run line.

BSR rb= black,rf=silver,lb=white,lf=white.Works good or 35-40 inside,40-45 out side(compound)

Another guy I race with (he is faster) uses Murdocks stock KILLER TIRE SETUP witch is on his site.It is a softer set up with a harder front outside.

I run it full short with 0 blocks in the front pod in the center and it corners great.

I allso run a Gen 2 with a 4300 brushless still working on the foams for it.

Jake