my esc in my b4 is getting very hot(hot enogh the heat sensor is kicking in) dose any one have any ideas or pics of how i can cut of make more air go around the heatsink on my esc it is in the stock location(AI ESC-SE B4)

Read my previous post on the OTHER thread that talks about the same information that YOU already posted. Ever tried research or reading a manual?

yup read the manuals lots

my esc in my b4 is getting very hot(hot enogh the heat sensor is kicking in) dose any one have any ideas or pics of how i can cut of make more air go around the heatsink on my esc it is in the stock location(AI ESC-SE B4)

stop using a 13t motor, and gear appropriately to the 13t.

ok well dose anyone know how i can make more air flow through the body to help keep the heat down if i run without a body it gets hot but not worrying hot

if your esc is getting hot, then their is something wrong. when was the last time you cut the comm. improper gearing.

this is the reason you have not received a reply

i just got this motor ran probebly 5 batteries and then it heated up i got it running and drove it in my basement for about another 5 10 mins so the motor probrbly has 1 hour to 1.5 hours