View Full Version : Evader ST/BX Pro


Evaderiffic
03-12-2006, 12:48 PM
Hey all..

Got an ST Pro for my boys this past Xmas.

They enjoyed it so much I recently purchased another Evader..this time the buggy version, the BX Pro.

For some reason, the BX Pro cannot even compete with our ST Pro in speed and acceleration.

I figured that both RCs have the same motor, ESC and the buggy being smaller and lighter, they would run about the same but it is certainly not the case. I have checked the BX for binding, rubbing or anything that would slow it down but found nothing.

Both RCs have the Team Orion Havok 15T double and Intellispeed 12T ESC from the factory..Maybe the motor on the BX is defective?

I have about 12 packs thru the ST Pro..maybe about 5 or 6 thru the BX Pro.

Any suggestions would be helpful.

Us newbies,
Randy & sons

rctazmanmc
03-12-2006, 01:08 PM
Are they geared the same - same spur and pinion?

Motors might also be dirty or not completely borken in.

Speed control may be programmed different also along with the radio gear.

Lots of things to look at and make sure they are set-up the same.

mc

tamiya_kid_ta04
03-12-2006, 05:33 PM
it cold be the gearing through the wheels, imean the bigger the wheels the less times they have to rotate while moving the sme difference, like which would go farther in three rolls, a real car tire or a 26mm rc car tire?