RC MotorHead
03-05-2006, 06:57 PM
I have a milled TC3 chassis from Ray on this site.(Cleveland)
I sanded and made sure each surface was smoothe.I made the bottom level.Car is just semi together.I became disabled and unable to ever get a chance to race it,So I did not finish building it.
But what has been done is perfect.Each part was sanded to fit just perfect not to tight or to much slop,Just free and smoothe.
The chassis has on it right now:And all parts are factory team or aftermarket
Foam in the battery tray.
Aluminum steering rack,with bearings
Bud's front(has blue trinity bumper) and rear bumpers-I have woven graphite milled front bumpers for the car too.2 of them(I need to locate them) and a stock rear bumper.
Front and rear arms with titanium inner hinge pins.
And nerf bars added.
Items to be added:
I have the factory teamdiff cases,sanded out.run smoothe and free. with hardcore diffs and IRS drive cups.
I have warp speed diff cases and a top plate.
Extra set of hardcore diffs built and ready to go in the car.
Complete IRS diffs ready to be built for the car.
It has factory team bearings and A complete set of Ceramic bearings also.
I have the COMPLETE NIFTECH TC3 Kit for the car NIP.From diffs to bearings,drive shafts,inner and outer diff balls,drive shaft cups.CVD's
Niftech dog bone pin tool,To add Kimbrough plastic pins
And niftech diff break in tool run off a drill or dremel
Niftech diff adjustment tool
I have a couple small baggies of new nice bent up ,different color and sizes of body clip and blue aluminum locking wheel nuts-Blue nut tool.Misc extras.
I have extra diff gear ring gears to build up another set of diffs for the car.
I have a custom blue aluminum milled down set of screws for the car.
Custom Built anti-roll bars front and rear,both with different size bars.
Have graphite and factory team battery hold down.
Have a large purple motor heat sink-very nice.
I have the 4 factory team threaded shocks built and ready to go on the car.
I have NIP complete set of factory team threaded shocks.
I have a varity of losi and associated block carrier's,sterring blocks for the front and rear.
New in package Factory team blue titanium turnbuckles.Will through in 12 or so blue ball cups.
Factory blue motor cam.
Shocks mount on a different style piviot ball set up,real free and smoothe.
Have factory team wheel adaptors and clamping wheel adaptors
Have blue aluminum locking wheel nuts.body clips plenty of little extras like that.
Have NIP TC3 car stand with fan have another blue touring car stand also
Trinity shock dyno NIP
Have extra a arms NIP etc....
Pics will show all the parts.
I have a JR8450 servo
Tires I have
Jaco's
4 pinks 2.41
3 purple 2.41
2 purple 2.21
3 plaid 2.41
one NIP purple
1 plaid 2.21
1 purple 2.21
TRC
2 purple 2.41
2 plaid 2.41
Everything here is selling in a Bulk lot $625.00 plus shipping FIRM-$350.00 now
email me at rcmotorhead@sbcglobal.net (rcmotorhead@sbcglobal.net) I have pics of the entire lot.
Will post price later today on the lot.
I can only take US postal money orders,I ship 2 day priority mail,insured and conformation of delivery
I sanded and made sure each surface was smoothe.I made the bottom level.Car is just semi together.I became disabled and unable to ever get a chance to race it,So I did not finish building it.
But what has been done is perfect.Each part was sanded to fit just perfect not to tight or to much slop,Just free and smoothe.
The chassis has on it right now:And all parts are factory team or aftermarket
Foam in the battery tray.
Aluminum steering rack,with bearings
Bud's front(has blue trinity bumper) and rear bumpers-I have woven graphite milled front bumpers for the car too.2 of them(I need to locate them) and a stock rear bumper.
Front and rear arms with titanium inner hinge pins.
And nerf bars added.
Items to be added:
I have the factory teamdiff cases,sanded out.run smoothe and free. with hardcore diffs and IRS drive cups.
I have warp speed diff cases and a top plate.
Extra set of hardcore diffs built and ready to go in the car.
Complete IRS diffs ready to be built for the car.
It has factory team bearings and A complete set of Ceramic bearings also.
I have the COMPLETE NIFTECH TC3 Kit for the car NIP.From diffs to bearings,drive shafts,inner and outer diff balls,drive shaft cups.CVD's
Niftech dog bone pin tool,To add Kimbrough plastic pins
And niftech diff break in tool run off a drill or dremel
Niftech diff adjustment tool
I have a couple small baggies of new nice bent up ,different color and sizes of body clip and blue aluminum locking wheel nuts-Blue nut tool.Misc extras.
I have extra diff gear ring gears to build up another set of diffs for the car.
I have a custom blue aluminum milled down set of screws for the car.
Custom Built anti-roll bars front and rear,both with different size bars.
Have graphite and factory team battery hold down.
Have a large purple motor heat sink-very nice.
I have the 4 factory team threaded shocks built and ready to go on the car.
I have NIP complete set of factory team threaded shocks.
I have a varity of losi and associated block carrier's,sterring blocks for the front and rear.
New in package Factory team blue titanium turnbuckles.Will through in 12 or so blue ball cups.
Factory blue motor cam.
Shocks mount on a different style piviot ball set up,real free and smoothe.
Have factory team wheel adaptors and clamping wheel adaptors
Have blue aluminum locking wheel nuts.body clips plenty of little extras like that.
Have NIP TC3 car stand with fan have another blue touring car stand also
Trinity shock dyno NIP
Have extra a arms NIP etc....
Pics will show all the parts.
I have a JR8450 servo
Tires I have
Jaco's
4 pinks 2.41
3 purple 2.41
2 purple 2.21
3 plaid 2.41
one NIP purple
1 plaid 2.21
1 purple 2.21
TRC
2 purple 2.41
2 plaid 2.41
Everything here is selling in a Bulk lot $625.00 plus shipping FIRM-$350.00 now
email me at rcmotorhead@sbcglobal.net (rcmotorhead@sbcglobal.net) I have pics of the entire lot.
Will post price later today on the lot.
I can only take US postal money orders,I ship 2 day priority mail,insured and conformation of delivery