Custom vinyl cut RC logos for their team or car, I can make just about any type.

Price varies according to quantity and initial time spent on the logo. I've been making my own and offer my services to others in the hobby.

I use a professional 24" vinyl cutter and 3 mil top quality vinyl.

This is NOT printed on vinyl it is vinyl cut and much more durable that printed. Also fuel proof for the nitro bodies!

Drop me a PM or email me. (twospeed@videotron.ca)

http://www.fxrhobby.com/images/rcdecalz.jpg

can we see some pics...

Yes can you post some pictures of you work

how much are we talking here. I would like some if the price is right

OH MY! never thought i'd see this from YOU! you have mail, my lil' canadian buddy!
-Tone

Here's some of my work. The more colors to cut the more it would cost of course because this is not print on vinyl, it's cut vinyl with a plotter.

I usually charge a flat $15 and upwards for custom design creations. For logos already made or duplications there is a flat $5 fee for computer work then afterwards it's so much per logo depending on size and complexiry.

For example, this Casaval Racing logo is around $4 USD each for a "hood" size on a sedan 190mm car.

Thanks

http://www.killeen.in/photos/logos/casaval.gif

http://www.killeen.in/photos/logos/Team.gif

http://www.killeen.in/photos/logos/65.jpg

Do you have any pre-made rims logos??
...Like for 2.2 dish rims... or for TC dish rims.

I am presently working on a few rims logos. Should have them out shortly. If you have any ideas or suggestions PM me.

You have mail...

OH MY! never thought i'd see this from YOU! you have mail, my lil' canadian buddy!
-Tone

Tone.... thats just ghey.... anyways, glad to see we have someone else interested in doing Vinyl, i may need some new ones made, my STOCK body has taken a heck of a beating by some unknown fellow(eheeeeemmm TONE). LOL

Freak

.............................

Those TC rim stickers look cool... will it come in those 3 colors??? Got any more? How much?
I was also think of a BEADLOCK looking style for some 2.2 truck dish rims. I think it's XTM or OFNA that has some, BUT I believe they are for larger rims.... correct me if I'm wrong.

Tone.... thats just ghey.... anyways, glad to see we have someone else interested in doing Vinyl, i may need some new ones made, my STOCK body has taken a heck of a beating by some unknown fellow(eheeeeemmm TONE). LOL

Freak

ROFL.... i didnt beat YOUR body THAT badly... plus, i had help... Stern and Phil.... and Sender... we all chip in in damaging each other.....

Oi.. Steve (canuck) is a good guy.... i've done deals with him before. i'm willin to try him out as well as our local vynil guy.... anyways... i need sleeps.... mad overtime this week.. just worked 8.45 hours OT today alone...... tomorrow is definately at least another 5 hours.....
-Tone

Yes the TC rims I am working on will come in three colors (silver, black and red). There quite a bit of work in doing them because I need to superimpose the three colors or build them once they are cut because let's not forget that I am not printing on vinyl but cutting different color vinyl sheets.

Nothing yet on the table for 2.2 rims. If you find a vectorial image of truck rims you want then I can work on it. Or even a good jpg but it's not easy.

As for price on the TC rims I was thinking basicaly a set of four for $10 USD. I will be taking pre-orders for now and will request payment when done.

PM me with your email address and name for pre-orders.

Thanks

My email
(twospeed@videotron.ca)

canuck: I like the idea of the touring car wheels. It does take alot of time when you have to layer the vinyl. I do vinyl for MYSELF only and it is not easy. I posted a pic of the last car I did for myself, Everthing on the car is layered vinyl. Beetween the numbers and the feather alone there are 10 layers of vinyl. Again nice work, and the prices are really good too.


Rob

Rebob5 excellent work. I love it !

Anyone interested in custom vinyl RC logos for their team or car, I can make just about any type.

Price varies according to quantity and initial time spent on the logo. I've been making my own and offer my services to others in the hobby.

I use a professional 24" vinyl cutter.

Thanks
Do you do big ones that you can put on the back window of 1 scale car? Such as AE Factory team? If so how much?
Thanks Semore

Yes, I do all sizes up to 21 inch in heigth.

Send me an email (twospeed@videotron.ca) with your sizes and color for estimate.

i would like vinyl of these two cars (the main sponsors and the numbers) can you do this? it will be for a custom works body, i can get you dimensions ( its a larger 1/10th scale car)

http://www.dononeal.com/gallery/221205083651.jpg
http://barthartman.com/pix.html

thanks
trick.parts@yahoo.com

Racer34V, vinyl work for that car is best suited for printed on vinyl rather than what I do is cut vinyl. I can do larger logos and numbers but the fine stuff is too much detail for the cutter.

ok thanks!

........................................

Can you make model B to fit Associated B3 & B4 rims for my dirt car? Would love to have some sets. LMK fex180@hotmail.com

Thanks

........................

I can make them fit just about anything. I don't know how deep the B3 and B4 rims are towards the inside but it should work fine.

I will email you.

B3 and B4 mag design done and ready to cut. :)

do you have any for the losi MF2 truck rims? if so how much for 2 sets of 4

It's $10 per set of 4.

Send me the dimensions for the outer and inner circle and I will custom cut them to fit.

Thanks

Last batch of orders finished and shipped.

Taking more :)

PM'd ya

E-Mailed ya back :thumbsup:

Thanks BAR !

Money was sent Monday

Came today....WOOOOWWWW!!!!! WICKED PRODUCT!!!(sry for caps)

This guy is good guys!!! i recommend him to anyone!!! :thumbsup: :thumbsup: :thumbsup:

Glad you like it. I threw in a few extras for ya :)

Recieved my custom decals today. Awesome quality!!!!!!!
Canuck worked with me all afternoon one day last week perfecting what I wanted.
Great service
Quality product

Thanks Canuck http://www.hobbytalk.com/bbs1/images/icons/icon10.gif

Glad you like it !

need some prices. here's what i am looking for / want.
A) hotbodies lightning stickers. just go to hotbodiesonline and pull the image off there buggy there. just no rtr or pro in the sticker. seperate hotbodies and lightnign stickers is should be how it read.
B) small drivers name stickers.
C) plain letter sticker NE Ohio Bashers
D) buggy wing plate / end plate stickers

can you do light reflective stickers?
can you do multi color on single sheet?
either email me or post here, your choice.

matt

Hi Matt, send me an email with specific dimensions and quantity and maybe include the image your are talking about.

Decals can be a couple colors. I need to weed them from seperate sheets and put them together.

Reflective stickers is possible also.

PM answered

Few more samples recently done !

Also have some special masking vinyl to make custom masks for airbrush work.

Is your vinyl cut backwards to mount on the inside?

Yes I can do reversed cuts like the type used for masking if you want to mount on th e inside.

Great work!! Wheel covers look great and fast shipping will definately get more!

Thanks Maddog23 :)

Looking for some number decals in red with white outline. I need them in 2 inch & 2 and one half inch sizes. I can send a sample. I am sure you can do it. Also do you take paypal. I am looking for several different numbers and need small quantities of both sizes depending on cost. Please respond to my e-mail which is jamesjet@aol.com
thanks
Jim

you have mail

Steve
Thanks for the quick turn around, I sent request with sample of decals I needed. Steve had samples of exactly what I wanted with price quote within the hour. Sent paypal and he is shipping in 1-2 days. You can't beat his response time.

I agree, he helped develop a logo and spent the weekend to finish and ship for me, this is my second order with Steve and not my last!! Great to work with and he come up with creative ideas...






Steve
Thanks for the quick turn around, I sent request with sample of decals I needed. Steve had samples of exactly what I wanted with price quote within the hour. Sent paypal and he is shipping in 1-2 days. You can't beat his response time.