Ok guys and girls this is a new thread started for the new adjustable delrin body post. The fronts have a 7/16 x 1.20 bottom with 1/4 delrin rod gone into it. The front post are adjustable from 1.35"~2.10". The rear post have a 7/16 x 1 3/4 bottom with a 1/4 delrin rod gone into it. The rear post are adjustable from 2.25"~3.00". The front post have the 32 degree angle with the 4-40 hole slanted in it and a 4-40 hole in the bottom to mount it to the chassis. The rears have the hole in top and bottom, they just slide up and down in the hole held with a 4-40 screw in the side, the holes they slide in are very snug so there is no play in it. The set comes in a 4 pack 2 front and 2 rears with set screws in the sides for $13 shipped. I accept paypal or money orders. My paypal address is khenson4@columbus.rr.com (khenson4@columbus.rr.com) and my e-mail is kndconceptsrc@columbus.rr.com contact me if you wanna send a money order for address. Also you can purchase them from NOR CAL R/C CONCEPTS ~~SWIFT R/C RACING PRODUCTS 6650 commerce blvd. #23 rohnert park CA 94928 PH.#707-586-3375 OR e-mail him at JPHRacing001@aol.com Jake can hook you up as well. Thanks KND Concepts

OHIO RACER>>> Where exactly is Mt Vernon Oh..

I want to get a set of these... Im about 30 minutes south of colombus... Id like to get some of these from you before snowbirds.. Thus Id rather not have to ship them..

PM me if you would be able to meet up somewhere this week...

Can you get some with 5 posts?

If you e-mail me that you want the 5th post I can get you one for $1 more. So it would be $14 per set with 5th post.

sent ya some money.. ;)

payment received and pst will be shipped in the morning. Thanks

Sent you a paypal order. Look forward to receving the posts!

Bob

I just sent money for 2 sets

Thanks

kenwood- payment received yours will go out in the morning.

amusicwiz- got your payment order will go out tomorrow afternoon thanks.
stesh- got yours too yours will go out tommorrow afternoon as well.

I have plenty of Post left, This is gonna be a hot item nobody has em like this. You wont be disappointed. Very good item for the price.

Jake (Swift racing) Your post went out this morning had to wait for more setscrews to come in. Thanks

Arnie Fie- I sent the post to you this morning as well.

All others- All orders have been shipped as well.

One QUESTION that was e-mailed to me was asking if I could make a certain size post and the answer is yes just e-mail me the size you need if it is smaller or bigger than the ones I make.

Will anyone be selling this at the snowbirds, you have a large interested audience down here.

I wiuld like to get a couple sets at the birds if someone is selling them......
my 12th scale needs to go on a diet, these might help...

Yes I will have Dusty Dean selling them down there for me so look him up if you want to purchase them down there. Thanks

Kev, better hope ol dusty doesnt go on a bender...the body post sales could go towards Hooters girls, haha

Kev, better hope ol dusty doesnt go on a bender...the body post sales could go towards Hooters girls, haha

maybe the hooter girls will want adjustable post also for only $13

For anyone at the birds that needs these post,I will be there wednesday around 4 pm.I will put a KND concepts sign in the window.I will also try to post the room number on here later tonight,if not tonight, i will when i get there..

Dusty Dean

lol now thats funny. I will have you a sign as well to put up Dusty. I just went out and purchsed a new cutting machine so all the cuts will be perfectly straight, cause I was cutting them by hand before. This machine will cut down my build time as well cause it does the straight cuts as well as the angled cuts on the fronts.

Ok Guys I did a slight adjustment on sizes, it actually gives you more adjustment now. The fronts are now adjustable from 1.35~2.10 and the rears are 2.25~3.00. Hope this helps some racers out, Have a great day and good luck to all at snowbirds.

I want to say I got mine the other day and these things rock... I was looking to shed a little bit of weight off my car and these did the trick... Great product ... ;)

Cutting machine, that will be nice. They are very nice anyway but that was the only thing I didn't like, I had to file them smooth!! But I figured it was like everything else we do with these pan cars, it needed some hand fitting. But they are very nice, very light and I will have to get me some of the adjustable ones sometime..wish I would have waited for them to come out!!

Kenwood- Thanks I glad you liked them, good luck aat snowbirds.

vwal- Yeah the cutting machine so sweet it makes the cuts baby butt smooth and cuts down on my cutting time (which my wife appreciates).

evryone else- all orders have been shipped that has been placed up to 1 p.m. today. Thanks

Ok guys if anyone tried to e-mail me today between 11 am and 9 pm tonight please try again I changed modems and had to redo my e-mail setup. Thanks

Kevin,

I tried to email you for another order and it bounced back. I sent you a PM todayfor some more. Great product!! I have plenty of people wanting them.

Ken

ok ken my e-mail shoud be working now go ahead and try it again. I had a digital phone put in today and they didnt bother to tell me that it aotomatically gives you a new e-mail account as well, so I had to go back in and re-add it . So it should work now.

Ok Guys I have a new e-mail that I would like to use for orders only. It is kndconceptsrc@columbus.rr.com and the paypal is still khenson4@columbus.rr.com So please take note of this change. Thanks

Here is a new website you can find out more info on for the Items i have.http://home.columbus.rr.com/kndconrc/

Ok I have an update on how many sets I am sending too snowbirds. I am sending 32 sets down with dusty. Thanks

P.S.- Also now have motor screws available on web link. http://home.columbus.rr.com/kndconrc/

Kevin,
I got my post today and these things are awesome, Very light and very durable. I am so amazed on how these things work, I cant believe that nobody has made these kind before. A very creative and excellent design. and cant beat the price. For all four post $13 is a very good price. Thanks again for shipping so fast also. Dave

Kevin,
I got my post today and these things are awesome, Very light and very durable. I am so amazed on how these things work, I cant believe that nobody has made these kind before. A very creative and excellent design. and cant beat the price. For all four post $13 is a very good price. Thanks again for shipping so fast also. Dave

Your welcome Dave I am glad you liked them.

Room 2168 for anyone looking for body posts....

Hey Dusty just wondering hoow things are gone at the birds LMK. Still plenty of body post available.

All orders have been sent Thanks Plenty of post available. just e-mail me at kndconceptsrc@columbus.rr.com

Erock - your post will be sent out this morning thanks.

cool thanks Kevin for the quick turnaround

COMING SOON:

Adjustable Body post with the pin type instead of the srew type. More info coming soon probally after this weekend. e-mail me for more info if interested at kndconcepts@columbus.rr.com

Ok here is some new post I can do now, it is the pin type instead of the crew type. They are adjustable as well and look great, e-mail me if interested they are gone for $18 a set shipped. kndconceptsrc@columbus.rr.com this is for a 4 post set and if you want the 5th post please add $1.50 more. This is a special order set so please allow 2-3 extra days before they are shipped. Thanks

All info is on the homepage http://home.columbus.rr.com/kndconrc Thanks

All adjustable orders have been shipped. Thanks

All orders have been shipped except the solid post they will be shipped on Tuesday Morning had to wait for more Rod to come in.

I got mine and they look good. Good value.

Thanks,

hey Kevin, a few of us want some body posts, the 5 piece threaded set, check will be in the mail tomorrow, 5 sets if you have them, Brad Whiteman 172 Gladesville Rd. Morgantown WV 26508,

what's your plans this summer ?? a bunch of us will be racing at Jacks, hope you and Jim can make it over some,


Brad

Thanks Brad I will have them in the mail tomorrow. We hope to get down there some this summer we loved racing with you Thanks Kevin

kevin...sent you a PM

Got a new batch ready for shipment just e-mail me if you wish to plalce an order. kndconceptsrc@columbus.rr.com and my paypal is khenson4@columbus.rr.com price for the screw type post for the next 5 days are $10 shipped for the 4 post set and $12 for the 5 post set. They go back upon the 21st of march. so get your orders in to save $3 per set thanks to all who have purchased already.

I will have some of the adjustable post at the arcor race at classic hobbies next weekend if anyone needs any jsyk.

Sent email order, let me know if you receive

Michael Hurt

got it e-mail sent back thanks Kevin

Kevin,
Please bring 2 5 post sets for me to the ARCOR Nats at Classic, Thx
Tom

Hey Tom I can do that. You missed a good 3rd heat and main last saturday I just missed 60 laps by 1 second. See you next week I WILL BE THERE FRIDAY SATURDAY AND SUNDAY. LATER KEVIN

hey Kevin, sorry for the delay, "the check is in the mail" , good talking to you the other night, the body posts look great, Todd has them on his car too, can't wait to get outside this summer, looking forward to racing with you and Jim again, Brad.

Anyone who has an order in the post in on hold till friday my drilling jig that I use is broken so I had to order a new one and it wont be here till friday sorry for the delay. Kevin