The 2006
Adirondack Carpet Oval Challenge
A ROAR State Championship Event
Saturday February 18

Track opens at 9 a.m.
Registration & Signups 9 a.m. - 2 p.m.
Open practice 9 a.m. - 2:30 p.m.
1st race @ 3 p.m.

3 heats and the mains for:
1/10 scale Stock, 19 turn, Modified ,
1/12 scale 19 turn

All heats and mains are 4 min. per ROAR rules
Awards to all in A-Mains and winners of all lower mains

Roar membership required.
May be purchased at event, $30 annual or $15 single event
--------------------------------------------------------------------------------
Entry Fee - 1st entry $25.00
2nd entry or Jr. family member (age 16 or under)$15.00

will the track be open for practice friday, if so what hours?

my son Craig will be making a trip up there to run 19T and maybe stock.what are ball park starting points for rollout up there in either class?

Would have loved to come for this race. Being the weekend after the birds this will be sleep time.lol

my son Craig will be making a trip up there to run 19T and maybe stock.what are ball park starting points for rollout up there in either class?
have not raced there too much this season but in stock we ran 183-190 with a 2 mag and 187 to 198 with a monster.

19t 36 degree around 220 and 24 degrees around 240 hope this helps

that should help thanks alot.John
www.fusionbatteries.com
www.knrcspeedway.com

Hows the 1/10 19T class look and what is the record in 19T?John

www.fusionbatteries.com

Hi John The record is 94 503 by the man himself Todd Putnam.Latter John H

after 60 Craig falls asleep lol. good luck john at the birds.It was a real pleasure pitting with you and scott and if we have any questions on the HD we'll get ahold of you.by the way keep an eye on K/N its gonna move in the right direction :thumbsup: .John

The record won't really apply because that's 5 minutes, this race will be 4 minutes.

which is better up there Slider or Solid Chassis on a HD car and what side springs and tire compounds?trc's

John, I've seen a few different cars fast in 19T at Glens Falls...Custom Works solid, Pro 3 slider, KSG slider, have also seen 3 Pinks and a black right front work (RC4Less) and green left sides/gray RF/white-gray RR work (BSR/Jaco), so a few different combinations get in the ball park, just need to set up to your preference.
Just noticed u got TRC's I'm not familiar withthem, whatever is equivilant to above. They will work good.

thanks alot that will help us we dont run many flat tracks but were hoping to have some fun and enjoy this.John

does this track have a web page or some picks

pic of track: http://www.albany.net/~rcrc805/tracks.html

website: http://www.racingcity.com

which is better up there Slider or Solid Chassis on a HD car and what side springs and tire compounds?trc's

John, no info on the HD. but tire wise, bring black, white, gray, stuff and you'll be set.
I run a
Black (35) or double black (45) RF.
White (25) LF.
White (25) LR.
Gray (30) RR.

All TM with good results.

19T wing or no wing??

wing!

your the man TG always have the answers for me.i'll have to meet you when we get there.John

19T wing or no wing??

Hey John, want Tommy to drive that thing too??? :jest: :tongue: .

Only kiddin ya know.

See you there.

if the Kid doesnt get it done i may have to hire him lol see at the Falls Brett. :wave:

what is the 19t motor rule..so many differant configurations out there.

tj towne

My guess is...ROAR race = ROAR rules??? :cool:

Later, Bret

what is the Roar 19t rule ?
tj

Basically any approved mod configuration with standard brushes (no P-94 style)

Later, Bret

jet I think he may also want to know if the D6 four mag cans are legal,


they are legal on some tracks and not at others. I don't know kens rule or i would answer the question TJ, but maybe the jet knows or kenny will update the info

wade

anyone who is planning on racing please post on here, the more competition the better, it will make more people want to show,but if it looks like no one is going to be racing it will not be a good turn out,

so let's have a role call,

I plan to race stock, and 19t or mod, whichever is the bigger class.

wade

thanks guys
I was going to try to come over but not looking good, we will see.

tj

19T here already signed up.

Im planning on stock, wish i could run 19t or mod though, but only have one car atm.

Rob

19 turn and stock

Stock and 19turn or mod

Paul

kenny,

do you have the number of people pre registered?

would be good to know?

may help the turn out.

i plan to make it with Antonio Denino...i will run 19t and tony should run 1/12

Pace

.....

Can somone confirm that there will be a 1/12 scale class?

Antonio

Stock.... Guaranteed to be a good time for all - fully stocked hobbyshop, smooth/fast track, local food from chinese to pizza! Hope to see some new faces - maybe even some of Rob's new friends from Plattsburgh?

Jason

I'm in for 1/12 scale sounds like fun.

Can somone confirm that there will be a 1/12 scale class?

Antonio

Antonio, there's been a handfull of 1/12 showing regularly, so I would imagine they would ALL come out for this race too.

See you Saturday.

Will the track be open friday for practice? What are the hours!!!?

not for you tommy, for everyone else though......yes :tongue:

Rob

ken said the track will be open normal hours. 10am- 8pm. big race should stay open later till atleast 9 or 10pm.

I'm sure if there's a number of people there, and they need more time, something will be worked out :thumbsup: .

The raceday schedule includes over 5 hours of practice before the heats. That along with the regular friday hours (10am-8pm) is a ton of practice time....15+ hours by my calculations. How much more do you think you need?

most dont live there like some :thumbsup:

The raceday schedule includes over 5 hours of practice before the heats. That along with the regular friday hours (10am-8pm) is a ton of practice time....15+ hours by my calculations. How much more do you think you need?

For some people, depending on how bad there set-up is, 5 hrs could mean 3-4 runs. Would you want to drive 3 hrs and not have enough time to get your stuff together? I know my stuff is usually close track to track, but I wouldn't drive the 3 hours to practice that little, especially since most people work on Fridays................... :thumbsup:

guy can someone help me with the set-up...i need a good starting set-up for 19T...KSG with Jaco Tire...(tire, spring , shock oil, Pod offset or center, tplate off-set or center etc etc)

another racer will come with me and Tony...and maybe another one too...he just need to have the OK from his wife...but it s another story! lol

Thanks

Pace

Pace, I would think your snowbirds set up would get you in the ball park. Glens Falls is about a 3/4 snowbirds track. You can see some different tire combinations and rollout posted on the first couple pages of this thread. I'm sure you won't have any problems getting hooked up and we will all be asking you for set up help!

Will stay open till 9pm Friday if there are many guys there to practice. For 19 turn we'll go by the ROAR rule book. Since we don't have 19T on a regular basis there really is no "Track Rule". As far as 1/12 scale, we have just a few guys who bring them out occasionally(about 3 times so far this season). We'll run them as long as there are at least a few. Just a few pre entries from out-of-towners so far. We have room for about 50. Remember your ROAR membership cards. Memberships may be purchased at the track.
We also have a ROAR State race on March 25.

just want to verify the weight rule, 40 oz- with transponders for 1/10th ?


thanks