I have a r/c car that I got from Radio Shack a few years ago. After using it some the wiring on the motherboard came loose. Does anyone know how to wire it back so I can use it again. I can't seem to have any luck. If you could help that would be awesome.

Thanks,
~RCphen~

Can you be a little more specific about what wires came loose? Can you tell where they came from, or do you need a schematic to find out where they go?

If you know where the wire came loose from, you just need a soldering iron, some solder, and a little bit of skill to put the heat of the iron on the spot that needs solder, then touch the solder to the tip of the iron, let it melt and flow around the wire and circuit board... remove the iron and the unused solder and let cool...

If you don't know where the wire came off of... your probably out of luck. Cause you probably won't be able to find schematics for it... Your only hope would be to find anohter identical car and look and see where the wires go...

Most of us around here don't deal with radio shack cars much...

where would u suggest to get a R/C from?

what exactly is a schematic?