View Full Version : Front end alignment tool
12-20-2005, 10:59 PM
I have 20 of these to sell. They are a front end alignment tool for pan cars, trucks and touring cars. They are all aluminum and will fit 1/8 and 3/16 axles. You can also use the blocks to check you camber against them. They are $39.95 plus shipping. Paypal only.
12-21-2005, 01:16 PM
Where do I send my money?.........................................wai ting to order! Thanks
12-21-2005, 08:22 PM
Where do i send the money i will take 1 Thanks Kenny Boehm
12-21-2005, 08:53 PM
My paypal address is email@example.com. I calculated the shipping at $5.
12-22-2005, 12:44 AM
I have 16 left. Thanks for looking. We started with only 20 but we can make more. We are starting to tool up some new aluminum front axle blocks for pan cars for the inline axle setup.
12-22-2005, 01:00 AM
12-22-2005, 03:53 PM
You mentioned that you have new blocks coming out that do inline axles.....so the set you are selling now will not? My friend has blocks identical to yours that have holes in them that allow the user to do both, just FYI for future blocks you make.....
12-22-2005, 03:55 PM
Will the set your selling now work with my custom works aggressor?
12-22-2005, 07:32 PM
Yes it will fit your aggressor. This tool will work with any pan car or truck that has 1/8 and 3/16 axles. The steering blocks that I was talking about were the ones on the car that are plastic now. We are just starting to make tools now. This front end tool will fit any 1/10 car or truck as long as your axles are 1/8 or 3/16. Thanks for looking.
12-22-2005, 08:29 PM
Can't quite figure this out - does it help you set up a front end with anything other than zero degrees of toe? Could you post a picture of how that would work?
12-22-2005, 09:52 PM
Paypal sent, thanks!
12-28-2005, 12:33 AM
That's exactly what it does. It sets 0 degrees of toe. You can put about 1/2 degree in or out by making the plates rub slightly on the inside or out side. The upright fits in the groove and it gets the front end at 0 if its loose(meaning if you can pick up the chassis and the bottom peice doesn't stay on or moves upward than you are at 0. I have set about 1/2 degree out by making the the upright fitting snug. If you are setting more than this than you are scrubbing speed.
I can get some more pics this week. It takes too long to get them to this site. The pic thing needs to be simplified for all of the users.
01-05-2006, 07:23 PM
10 more left to sell. These area lot easier to use and great for a quick check between rounds and small enough to fit in the drawer of most tackle boxes.
01-06-2006, 10:56 AM
I received mine, it is nicely made and does a great job, thanks!
01-06-2006, 06:19 PM
Thank you. More new stuff coming soon.!! Small 1/8 axles for pan car front end like the Wolfe style that is no longer made.
01-15-2006, 07:15 PM
Ken, am going to shoot you a paypal for one if you still have some. If not just kick it back to me.
I'll take one too.Send payment today..........
I was getting one of these to try and beat you Andy. Now I am giong to have to find another way to get in front of you.hehe
01-20-2006, 08:02 PM
Chris yours will shipped Sat am. I've been w/o a computer since Monday morning and I just got my computer back from the shop today. I had a real nasty virus that bogged my system down . This thing flies now!! Andy yours will ship after confirmation.
01-22-2006, 05:39 PM
This is a great tool I use mine all the time. Helps me get the front set up right the first time. you wont be disappointed
01-22-2006, 07:30 PM
I'm interested. Can you send some pics to Thunder_Road_RC@hotmail.com? Thanks; Ernie P. :cool:
01-22-2006, 08:40 PM
I have a link on the 1st post. If you need more pics than that LMK.
Got it today. Looks good.
01-23-2006, 10:46 PM
Great! I'll leave feedback for you on it.
01-24-2006, 01:35 AM
Any left ? firstname.lastname@example.org
01-24-2006, 08:49 AM
Yes. If you want one please paypal me at email@example.com for $39.95 + $5 for shipping.
01-26-2006, 04:02 PM
Take some to the "Birds". Sedan drivers will eat them up. Look up "Larry Ruby"
in 19T Oval, Kenny Collins of KC Racing in MOD.
Just a thought.
01-26-2006, 05:49 PM
If I knew anybody that was going I would send them with the tools.
Thanks for the order Larry.
01-26-2006, 09:18 PM
I know of about 5 people who are going to Snowbirds.....call me and I will give you one of their numbers and help you out....
01-31-2006, 07:01 PM
fixitguru, It shipped today. Thanks
01-31-2006, 07:03 PM
Thanks Ken got mine yesterday , works great would recommend to all racers.
01-31-2006, 11:39 PM
Check out these new photos of the tool in use.
It can be used to align the front end of any car/truck with 1/8 or 3/16 axles plus it can be used to set camber as well. It will work for TC3 and TC4 as well.
01-31-2006, 11:56 PM
Orderd mine yesterday , cant wait to get it thanks ,Ken
02-03-2006, 05:04 PM
Orderd mine yesterday , cant wait to get it thanks ,Ken
Got it today .... Looks great. THANKS KEN
02-06-2006, 10:06 AM
DO you have any left, I will deffinetly take one!!!!!!!
02-06-2006, 06:02 PM
I have some more left. Paypal me at firstname.lastname@example.org for $44.95. I can send it out Tuesday.
02-06-2006, 09:39 PM
Got paypal today. I will ship out Tuesday.
02-07-2006, 08:41 AM
Thanks cant wait to get it
02-10-2006, 09:39 AM
02-10-2006, 10:24 AM
93ta, yours shipped on 8th. Thank you!
skip724 yours will ship today (10th) Thank you!
02-10-2006, 04:29 PM
Got it yesterday, looks AWSOME
02-10-2006, 05:42 PM
Anyone who needs one please put your hobbytalk handle in your note section for paypal payment. This makes it easier to see who paid for what. I have been able to figure who is sending money but this would make it alot easier in the future.
wait a minute
02-10-2006, 06:49 PM
do u have any left or did u sell all of them?
02-11-2006, 03:19 AM
I have 3 left. I have some people that I have set 2 off to the side for but 3 more that are not reserved for . My machine shop can make some more as soon as they slow down. You can paypal me and I can send one out Sat. if you wish.
The machine shop has been really busy geting our new 1/8 front axles ready. They should have been finished 2 weeks ago. These new axles will be like the old Wolfe's (just they won't bend like butter) and better than the junk Lunsford's that snap after the lightest rub on the track with another car.
02-11-2006, 09:36 AM
02-11-2006, 02:36 PM
rcgen, I sent it today.
Doug c, I sent it out today
Thanks for the orders!!!
02-16-2006, 04:44 PM
I received my today. I already checked it out on my maverick and rdx. Dual purpose alignment tool touring and oval....
vBulletin® v3.8.7, Copyright ©2000-2013, vBulletin Solutions, Inc.