WE'RE LOOKING TO UP GRADE OUR CURRENT AMB SYSTEM TO A WINDOWS SOFTWARE FORMAT SO WE CAN USE A LAPTOP W/XP.
ALSO HAVING PROBLEMS WITH CURRENT SYSTEM MISSING LAPS AND THERE'S NO CONSISTENCY WITH A PARTICULAR TRANSPONDER OR VEHICLE.
IT JUST SHOWS AN 8 SECOND LAP VS 4 SO IT DIDN'T COUNT A LAP.
ANY HELP WOULD BE GREATLY APPRECIATED.
ncfrc@kingcon.com

RODNEY

what system are you using?

I think its an AMB -20 , which is their latest version for rc racing.
Aprox . two years old.

Thanks, Rodney

Rodney,if it's the amb 20 ck the sensitivity,number of hits, also ck your wire connections we had the same problem with the amb 20.


Dan Dubuque

Its actually an AMB-RC system and we're sending in our decoder box for an upgrade

R.S.

AMB is upgrading any RC system to count both replacement and personal transponders for FREE , they just finished ours this week, turned around in 3-4 days ! Great Service

rodney

are you guys racing next friday night ?

tj

Jan 6th is the first night for the 2nd season

I have had 3 weeks off NEED to race.

tj

Make sure that your loop is at least 2 feet wide Wider is better. If you make it too narrow it will miss the faster cars. With a small loop the system will be inconsistant. Signal strength will be good but the number of hits will be low.

Thanks , we did widen the 15ft loop to about 18 inches and it helped over the previous 12

Yea we had the same problem. It was OK when we were racing slower cars. Once we went to 19t we fought the problem for a few weeks tried several things (new computer, new loop and coax, ect) That is when I noticed that the slower cars were getting a lot more hits. We made the loop wider and the problems went away totally. Hits came way up on the faster cars.