Hey oval guys there is a good oval track in Jamestown New York.It's a flat carpet oval about 170-175 race line.The web site is www.cwactionhobbies.com come check it out!

I forgot to mention,they start early and get done fairly early...last week-end 65 entries and we were done around 11pm

I'll be there this weekend, anyone else in?

Just bringing this back to the top.

Hey I know this is a little early to mention but there is going to be an AL Sheldon memorial race on Feb. 18th 2006 at Action hobbies in Jamestown New York.Here is the link www.cwactionhobbies.com The track is a flat oval, 175 foot race line, plenty of room for pit tables(some avalible) so mark your calander...

last year this race attracted 95 racers.

What kinda carpet do they have?

What kinda carpet do they have?

I thought u quit racing ??
he he

Just out of curiousity and since my mom is based in Corning 2 hours east of you guys. I might try to attend your trophy race Feb 18th.

What does your 4 cell stock look like for attendance and competition? I race mainly in Granby, St-Roch, Plattsburgh, Massena, Barre...

Ziggy, carpet is crc gray ozite. go to web site above for picture of track and talk to Pete; he's been there. Bob p

Outlaw 44, last year at the feb. 19 race we had around 30 guys running 4 cell stock I believe, Overall turnout was 95, which is pretty respectable considering the turnouts at other big races (other than snowbirds of course.) A lot of Top Caliber guys have ran here, Jeff Carpeletti (spelling??? sorry Jeff, lol), Pete D, Billy Kimpton. Rumor has it Ziggy, Pete, Steve Miller, and Jeff Carpeletti might be making a trip here once a month to run modified? Racing is typically very close, last year I think you had to be within 2 seconds of TQ to even make it in the show for the 4 cell stock A-main. If you need any set-up info let me know, I should be able to get you in the ball park. Looking forward to seeing you if you decide to make the trip, bring some friends, lol. Have a good one.

Mmm

Sounds very interesting. I'll just bring my 4 cell stock racer up for a spin then. I'm just drooling over that 170 foot race line...

What do you run for tires and roll out in 4 cell stock?

Tires varies with manufacturers. Last year I ran murdocks and had good success, white left rear, double grey right rear, grey left front, and purple/blue right front. I am trying TRC's this weekend, and will let you know what I find for compounds.

Roll out depends on motor, I've been as high as 2.15 and as low as 1.90. I am sure we can get you close when you get there.

Thanks

I'll send you a pm before I comne down

Hey Patch, I will be there this week-end....Pete D and friends might be attending.Jeff

Well another great turn out at Actionhobbies this past week-end, 70 plus drivers showed up for some awsome racing.
Just want to say thank and congrats to Pete De angola, he dominated the 1/10 stock class with a new track record, also want to thank Billy Kimpton and Terry for coming it was nice seeing you guys again!
Thanks everyone for a great turn out.....Jeff
check out the web site for more info www.cwactionhobbies.com

Well fountain raceway in rochester just closed its doors.I know there will be at least 8 people coming down there to race. I talked with billy k. and he told me it is a nice place. Will be maken the trip down this Sat... See you there

Brian Woodhams

Cool, I heard the bad news about Fountain.........that sucks!!!!!. Pete, Terry,Billy,and the rest of the guys showed up this past week-end, and had a good time.Hope to see ya there this week-end

yes i will be there. meet you then

Brian

i'll be out of town for 2 weeks, but i'll be there on Dec. 3rd

also, do i need to bring my own table, extension cord, etc.???

Tom, probably best to bring your own table,chair, ext. cord,etc. There are a few tables available but they are gone real quick. Track opens for practice at noon. Looking forward to seeing you again. Bob

Great track... I had tons of fun this weekend. 21 cars in 4 cell stock. 4 people in 19T. I hear there is some type of big race there this weekend... so everything is stock only? After this weekend I will be running 19T with you guys.

Tom this track is insanely flat. The only bump you feel is when you drive over the loop. If they made it a over head loop you would never feel anything unless you hit the ice. Trust me.... Don't hit it. These guys do a hell of a job for a track that gets packed up.

Woodhams... if you and Dysart are coming we can run 12th scales then. I think they only require 3 to make a class.

Jeff.... I heard they open at 10, is it 12? i want to get there early this week so I don't have to thrash as much.

Smalls, the Hooters Outlaw Tour for 4 cell stock will be in town this week. We will probably have 30+ entries for this class. All classes will run, including 19 turn, as long as we have at least 3 entries. They start laying down the track at 10:00 and practice starts at 12:00. Some of us get there early, get set up, and then go for breakfast while they finish setting up the track. See you Sat. It should be a good one. Bob Patch

Smalls, the Hooters Outlaw Tour for 4 cell stock will be in town this week. We will probably have 30+ entries for this class. All classes will run, including 19 turn, as long as we have at least 3 entries. They start laying down the track at 10:00 and practice starts at 12:00. Some of us get there early, get set up, and then go for breakfast while they finish setting up the track. See you Sat. It should be a good one. Bob Patch
I'll be there! :thumbsup:

Woodhams... if you and Dysart are coming we can run 12th scales then. I think they only require 3 to make a class..

I plan on being there this weekend to run 19 turn, and what motor (class) would you guys be interested in for 1/12? I could use some practice...Jeff Carapellatti

Back to the top..............................

thanks for the info, guys. i'll see you all on saturday Dec. 3rd. also, 2 or 3 heats?

Yeah i will be there. Guess i will be getting my 1/12 ready to go. I let Bart wheel it last week and she got some wall damage...I think dysart is looking for a ride.I have andy with me but we could prob fit 3 if we put our stuff in the back of the super ford. No cover on the back yet so I have to see what the weather is like.

Tom AKA(Pancartom) send me an email briwoo@frontiernet.net Dysart want to get a hold of you. I will give you his number...

So there will be a 19 turn class??? What motor can we use. I see that it has to be locked timeing?? If so guess I will have to buy a new motor. What about stock. All i have now is 4 mags. Are they leagal there??

Thanks
Brian Woodhams

Brian- 19 turn pan car is adjustable timing only. mod truck is fixed timing. out law stock is not legal in 4 cell stock. only Roar approved stock motors. If I can be of anymore help, let me know. Hope to see you there.

thanks for the info, guys. i'll see you all on saturday Dec. 3rd. also, 2 or 3 heats?
It's 2 qualifiers and a main, open at noon, and start about 4:30.Open practice Noon till 3:00 then practice by class.

thanks, jeff

thanks, jeff
No problem, look forward to seeing you then.Oh what class you gonna run?

Does the track have niftec traction compound available? Looks like I will be there Sat. for stock and 19t

stock for sure, maybe 19 also

I know greg doesn't stock the niftech traction compound at craftworld, but I have some if you need some. Just come and see me when you get there. I am pretty sure most everyone there is using either jack the gripper or TQ mod.

is paragon allowed here?

is paragon allowed here?
odorless only....sorry

good to know, thanks

Well again we topped our best turn out of the year, with nearly 100 entries this past week-end, The Hooters Chassis Tour was in town this week end and the racing was great! Congrates to all the winners, yes even Buddy.lol!!! Also want to thank the Rochester connection for coming down and running 19 turn,It was nice to have some good clean racing.See ya guys in a couple weeks, I'm off for alittle bit..Jeff

www.cwactionhobbies.com

Jeff,
Thanks for the help with car, it made a huge difference - never have gotten that many laps before & wouldn't have if I hadn't made the changes you recommended! Now I guess I need to get my 19t car together to let you stomp me like everyone else (oh well gotta try). Good run & Thanks Again.
Jeff P. thanks for the radio help! See ya guys great racing this weekend!
Later - Shaun N.

Does the track have niftec traction compound available? Looks like I will be there Sat. for stock and 19t
I usually have Niftech TC in stock at SPC (http://www.specpointbatteries.com) and I take a few extra bottles to the track with me. I'll be racing at the Indoor Champs at Cleveland this weekend, but other than that look me up the next time you are at the Jamestown track if you need some.

Tom Himes
SPC

Wow.... great place to race...Lots of fun.
Jeff Carp.... 19T is a blast.

When will you be back to run 19T?

Not Sure when carpy will be back, but I will be back starting on December 3rd. Next week I'm taking the wife and daughter shopping. great time this weekend, even though my performance was less then spectacular. Good job to Jeff C for holding down the putnam / TQ Combo while i get used to my new car. See everyone again soon.

I had a great time in 19turn. I will be back this week to race.great track

Chris are you going down there this weekend??? I think Dysart is coming. We were talken at work today....You know he is my boss so it is OK :) lol

I would like to make one sugestion to make it better.... Need to move the driver's stand back about 2 feet. When all us fat guys get up there we have a hard time seeing around the person next to you.....if we could stand fat kid skinny kid it would work but there seems to be a shortage on the skinny kid side..

Brian

oh yeah 1\12 anyone????

Sorry I wont be there this week-end.Not sure how many will be there for sure.

Oh briwoo, I'll let you know when I'll be there, so I can get my 1/12 together.What motor you wanna run????? stk or 19t?

well i am up for anything... I just work all week so i can race. Prob just start out stock. I know chris wants to do 19t when snowbirds gets closer. I have to get some motors. All the stocks i have are 4 mag.

I will se everyone the first week-end in DEC.