View Full Version : Complete sell out.A must to look !!!!!!


Pages : [1] 2

RC MotorHead
10-25-2005, 03:10 PM
Please respond to me by EMAILS ONLY......... rcmotorhead@sbcglobal.net

I will slowly add to this list of items for sale.Everything is in new condition or is new.Not used very many times.
All items priced are for 48 US states shipped priority mail,conformation of delivery and insurance will be your choice to pay-But keep in mind once I ship it will be trackable but it is out of my hands-I pefer you pay for the insuance.Everything will be packaged properly for safty.
Out US shipping price will change,But I will ship world wide.

Items not marked,Please make a fair reasonable offer.

At this time I am ONLY taking Postal Money Orders.
When you mail you money orders,ONLY mail them priority mail with conformation of delivery,This way you know the money gets here and it is trackable,Thanks you
Charger's

TURBO 30-Completely redone by CE ,Backlit,new case,front and back plate/wiring---SOLD


TURBO35 These are in a carring shelf,Each charger has a battery tray mounted in Carring shielf.-SOLD

KO Propo BX-213 mh charger with the fan attachment used One time-SOLD

Indi Torpedo-Used very little-SOLD

Orion motor checker in the box-Used a few times.

Discharger's

I have the DEANS 20 amp discharge set up,That also works as a car stand(has foam for the car to sit on) Never used-SOLD

I have a Indy Reactor 20amps NIB-SALE PENDING

I have the Indy Booster-3 for AA battery's ,Used very little

Eagal Racing SP SADDLE AUTO cutoff discharger-check out Integys website for details

Indi Octane 2

Real Time 2.5

Team orion discharger-diodes

Team Cobra discharger-diodes-NIB-SOLD


Have Brand new Hudy Tech lathe-The last model that has the adjustment for the armiture width,With all goodies/upgrades that Hudy had to offer and extras too,Also had it set up at a machine shop,Added a Carter Diamond bit,I have a speicaly made armiture from Big Jim so aperson can make a drive motor that can be ran off a power supply-12 volt.Used one time for a trial cut,Cuts smoooooooothe!!! And perfect all the way across the comm.V block lathe with screw dowm bearing hold downs,High end Hudy lathe motor,Has ceramic bearings in lathe,Extra new set of Hudy bearings,2 extra packs of Hudy pullys,Extra adjustable V block.
Will send pics,Make offers off them.SOLD


New JR Gold R-1 (PCM) 75 mhz with R330 micro receiver. Used one time for an indoor carpet race,In a Aluminum carring case-Not the JR one,But one like I use for my dyno except this one is all foam and is cut out for the controller and can add items if you like,By just cutting foam out.JR neck strap SOLD
I have the case,R330 receiver,JR case with 5 sets of crytals,and one sets has 2 extra for the cars,You can run 3 cars and not change crytals,and a JR neck stap

2-JR R200 receivers -SOLD
1 Novak FM JR style receiver-SOLD

2 Quantum Competitions,First versions,Both have the Worlds kit,Plus custom heat sinks.One is brand new and the other used in 4 cell indoor Oval racing for about 8 races. $100.00 Shipped SOLD

SERVOS
JR 8459,Used for about 10 races-
JR DS9411 digital about 8 ocal races-SOLD


Bullit MotorSports scale systems

One 2 scale set up ,Used for Oval racing,Also about 4 races

Have a 4 scale system that is still new in package

Got them from rc4less.

The Unity Tool Brand new check out www.unitytool.com (http://www.unitytool.com/) and make me an offer -Sold

For Trucks/Buggy's-Associated
Also have 3 sets of TRC front foam tires(1 set still in package)the other 2 pair are in Great condition.
I have a complete F/R set of Jaco tires already trued down.
I have 2 sets of rear TRC foam tires-They are for the Losi truck ,But ran them on my Associated Truck with no problems. Killer foams-$70.00 shipped

Race Tech front end setup system for trucks and buggys -New $35.00 shipped

Ofna Auto Tire truer,With caring plastic case,Holds arbors in top compartments.Trued around 15 sets of foams,Killer condition,Comes with sanding sticks-SOLD

Have 1 arbor the does hex touring cars tires

1 arbot that cuts 10th scale Oval tires both the front and rear tires on ONE arbor.

Truer and abors,case shipped $220.00 obo-SOLD



This not even close to half of my sell out,Much more to come,Just do not want over loaded with emails,But have Foams,batteries,motors,set up systems,touring car-brand new-MAJOR PARTS,Oval cars.Trinity motor,battery,carring bags.And just so much more.Working on that list and pics right now.
Have all batteries ,specs and pics and motor list will post them next.
Batteries WILL SELL IN PACKAGES

6 cell

New in package
SMC-3300 Yellow green band on end all 30 amp numbers-Will sale as a package.On the new and assembled packs.
1-1.185 374 2.3
2-1.176 409 2.5
3-1.177 403 2.5
4-1.174 400 2.5
5-1.176 396 2.5
6-1.171 411 2.6
7-1.172 411 2.7
Promatched Panasonics Ultra Gold -Assembled 3-3 assembled corretly
1-1.147 355 18 Ran once-practice
2-1.148 358 19 New assembled
Bones Motor Sports Sanyo 3000 assembled 3-3
1- 1.156 362 3.6 new assembled
2- 1.157 359 3.6 Ran a small practice

Light speed-used but not abused dischaged at 20 amps
1- 1.183 543 18
2- 1.183 540 18

4 cell batteries-SOLD IN BULK LOT

Pro matched Racing Ultra Metal Gold
1-1.142 374 19
2- 1.149 375 18
3- 1.145 359 19

Trinity Ultra metal gold
1.145 353 3.2

Bones motor sports Sanyo 3000's
1- 1.158 356 3.6
2- 1.164 362 3.3

Pole Position
1- 1.148 386 25
2- 1.148 392 25

TQ Cells
1- 1.179 413 2.5
2- 1.175 420 2.5

SMC purple/greeen 3300's
1- 1.155 401 3.0
2- 1.155 399 2.99

2 packs of sanyo 2400,wraping removed.Packs have lots of rip,Just not for racing.Good to sit the car up.Really rip for around 3 min.s SOLD

I have pics of all batteries,I have them all in Trinity carring cases.More you buy the better the deal.All battery's have just been cycled to isure cells conditions.

GP Micro cells-receiver packs packs built 5 battery packs weigh 0.07

Stock motors to many to list,All in nice condition,Over half has only one run after I rebuilt when it was new.I go completly threw all my motors as soon as I get them,There are a few Monster motors that have one 4 cell run on them-untouched besides that.Have pics of them in Trinity cases.
I have a list of the motors and how many times each has been ran,except for the 8 blue endbells,Just got them to dyno test.All in good condition-Never raced.
Most are tuned for 4 cell oval racing-Tuned on Turbo Dyno

I am working on a list for My brand new Ray milled chassis.With so many parts it is unreal,Foams And my Oval inventory will be very large.I have a motors builders dream kit I am putting together.

Prices that I have been selling things would surpise everyone,I am dealing EVERYTHING MUST SELL...............................

Thanks for looking

t4racer
10-25-2005, 05:22 PM
I'll take the deans discharger and indi octane 2.
cawyman@csupomona.edu
Email me with an answer and address to send paypal

MARCUS
10-25-2005, 06:16 PM
How much, for the Tire truer?

Thx1
Marcus/Marie
215-983-9322

DJ1978
10-26-2005, 10:08 AM
I sent an email about the radio package.
Thanks
Dan

bigcheese
10-26-2005, 01:02 PM
I'm interested in the tire machine if still available. Can paypal the funds. Let me know your price. Thanks,

Rick 330-472-5112

RC MotorHead
10-26-2005, 05:59 PM
Please emails only


Prices changed and items added

TTT

VA.RACER
10-26-2005, 11:11 PM
are the receiver packs new?
any pics

pvtysux
11-02-2005, 03:37 PM
do you have any mod motors?

voltage
11-02-2005, 07:06 PM
how much 4 the 2 scale system

voltage
11-02-2005, 07:08 PM
hey do u have a tool box with tools and stuff in it

jt6
11-03-2005, 11:07 AM
You have mail.

pvtysux
11-03-2005, 01:12 PM
pics of the batteries 1-7 please to mroseberry@cox.net

RobD
11-07-2005, 03:59 PM
Sent an offer on the Reactor 20...

RC MotorHead
11-09-2005, 12:38 PM
TTT Thanks for looking

RC MotorHead
11-18-2005, 01:45 PM
Will sell batteries in lots.

Working on list for Oval sell out and TC3 (new) complete sell out

Thanks For looking

T4Fever
11-18-2005, 01:56 PM
how much for the SP discharger....

voltage
11-18-2005, 02:18 PM
interested in 2 scale system

RC MotorHead
11-20-2005, 01:35 PM
TTT


Hey see something you like,Don't like the price email me I can send pics and make an offer,
Items are going to be sold.......

Thanks for loooking

If anyone has not received a reply back,Please email me again.My firewall is funny at times.

toytowne
11-20-2005, 04:44 PM
are you selling turbo dyno ?

toydoc@adelphia.net

speedway racer
11-22-2005, 06:18 PM
Send me a list of motors DMHROOFINGCORP@aol.com

RC MotorHead
11-30-2005, 02:57 PM
If anyone has not got a response back,Please email me again,And don't forget the Subject-Item that you are interested in.I am losing emails because of my firewall.Because they say hello or somthing like that.

Thanks for looking

Working on a list for my Oval cars and a mack daddy Milled TC3 with everything possable,Plus some

RC MotorHead
12-01-2005, 09:24 PM
Thanks for looking

willing to make deals

RC MotorHead
12-02-2005, 08:09 PM
See something you like,Don't like the price or want to buy say a lot of batteries .Email me ,willing to deal



Thanks for looking

RC MotorHead
12-04-2005, 10:26 AM
Items added


Thanks

RC MotorHead
12-11-2005, 09:20 AM
Thanks for looking

Will sell in lots,I have much more to list.

Thanks

RC MotorHead
12-11-2005, 04:38 PM
dnoggle@cox.net you are asking for pics of the Ofna truer and your email is not working


Let me know
Dwayne

prdquik
12-18-2005, 12:34 PM
E mail sent

suzukiracer019
12-19-2005, 09:37 AM
you got mail

RC MotorHead
12-23-2005, 12:01 PM
Got the email


Where are dealing ....

Happy Holiday's Everyone

K2V01b
12-30-2005, 06:21 PM
PICS of JR R-1 Radio Gear

RC MotorHead
01-12-2006, 05:55 PM
Thanks for looking.

Thanks for the sale. We are dealing......................

center33
01-16-2006, 02:23 PM
Have a 4 scale system that is still new in package


What will you take for the scales

RC MotorHead
01-17-2006, 02:05 PM
Email me at rcmotorhead@sbcglobal.net

I will send pic of the 2 scale system,Both are built by Bullit MotorSports
But I am selling as a unit,Not the scales only,Not sure if that was what you was meaning.

Thanks

suzukiracer019
01-24-2006, 07:36 AM
how much for the 2 scale system? can i get pics of it? suzukiracer019@aol.com

RC MotorHead
01-30-2006, 05:23 PM
We are dealing.

Thanks For looking

RC MotorHead
01-30-2006, 05:31 PM
Sales.......... we are dealing



thanks for looking

gasman1
01-31-2006, 10:10 AM
sent you an email about Indy Reactor 20amps

revoperson
01-31-2006, 11:47 PM
what trays do you have left

omnis85
01-31-2006, 11:57 PM
how much for the 2 scale system?

RC MotorHead
02-02-2006, 06:18 PM
I have checked with everyone ,I think.If not contact me at rcmotorhead@sbcglobal.net

Thanks
Dwayne

omnis85
02-02-2006, 06:29 PM
I found one--I just wanted a price, I would have bought it probably if you listed a price.

RC MotorHead
02-03-2006, 04:51 PM
It is hard to price somthing,Not knowing people are located that are buying.
People seem to prefer price's shipped.So I prefer to talk on the phone and work out deals,And ever person that has made a deal with me is MORE than happy.
I do make prices that people can not refuse,But I do not donate items.lol

Ray Spencer
02-13-2006, 09:18 AM
i am interested in motor builders dream kit,let me know items and cost thanks

RC MotorHead
02-20-2006, 09:00 PM
I have the Motor Builder kit all on pics now,I made large pics,So I could hopfully use them instead of making a VERY large list.

bones
03-14-2006, 05:22 AM
do you still havetwo scale how much

RC MotorHead
03-14-2006, 12:33 PM
Yes,check out the posing.I have several going on.
Or just email me at rcmotorhead@sbcglobal.net I have pics
Thanks

RC MotorHead
10-09-2006, 05:41 PM
Just updating posings for the carpet season please check out my other listings



Thanks

Spoiler
10-09-2006, 08:59 PM
Hey Dwayne free bump for a awesome seller...did ya killem this year???? (The catfish that is)

RC MotorHead
10-16-2006, 08:03 PM
Yes it was nice,Thanks for the bump

RC MotorHead
12-04-2006, 05:28 PM
Just updating,Please check out my other postings

Please email me for any pics,It is the fastest wat for me to respond

rcmotorhead@sbcglobal.net
Thanks