I have only run my 10L4 on carpet, and I will be heading down to the ROAR Region 9 Champs next week and I am in need of some help.

It will be a fairly large track on sealed asphalt here is a pic of what it will look like...http://www.hobbytownsatx.com/dailyhomepage/?id=12619

it will be a 19T 4 cell class for 6 minute races.

i am fairly ignorant to oval setup, and i cannot seem to find a good "base" setup to start with....so any of help would be most appreciated.

thanks,
Marc

Here is a real good starting point for your L-4....

Rear pod=offset
Rear side shocks=60wt/oil,,,,,left shock(blue spring)..right shock(silver spring)
Center shock=60wt/oil...Black spring
Front end=4 associated silver washer under each screw
Rear pod=#2 ride height adjusters upside down
Left front=wolfe green spring
Right front=wolfe red spring

Tires rear=pinks
Left front=pink
Right front=purple

as for the motor,turn the timing until the amp draw is @9amps...
As for gear=start out with a 100spur and a 40 tooth pinion.

This should be an Awesome starting point!!!!..Good luck... :)

also you can try the 10l4/ l3 thread in the product section. there is pages upon pages of info..

Here is a real good starting point for your L-4....

Rear pod=offset
Rear side shocks=60wt/oil,,,,,left shock(blue spring)..right shock(silver spring)
Center shock=60wt/oil...Black spring
Front end=4 associated silver washer under each screw
Rear pod=#2 ride height adjusters upside down
Left front=wolfe green spring
Right front=wolfe red spring

Tires rear=pinks
Left front=pink
Right front=purple

as for the motor,turn the timing until the amp draw is @9amps...
As for gear=start out with a 100spur and a 40 tooth pinion.

This should be an Awesome starting point!!!!..Good luck... :)

this guy just dominate race 5 of the florida asphalt oval series. BTW good job focker

thanks for the help...i will be heading down this weekend - i will let you know how it all works out....

marc