World Class Batteries is under new ownership.I am committed to provide the best batteries and customer service on the market today. New ib3800 will be done by this weekend. The new web site will be up very soon for more info.You can call me at 309-368-4400 thanks Tony Mitchell.

awsome!!!!!!! I use to run world class batteries years back. GLAD to hear they are back. whats the web address I will order my batts from you

Sounds good Tony.

Tony is a good racer and great guy. Get them batts goin.

what happened to eugene ryder owning it?

Thought it was owned by Chuck...

Tony bought it from Eugene, Eugene has had it for the past few years i believe. Good luck to Tony in the new endevor.

Thanks MK and Danny . First case is done and they look great 440 to 480sec. and 117t to 118t volts.

Are you discharging at 30 or 35 amps?

Dis. at 30.

to the top

What is your price on 6cell packs? You can contact me at bderting@co.iredell.nc.us
thank you
brooks

Tony,

Good luck in your new business venture! looking forward to some good racing this winter as well....

The new World Class website is up. It can be found at http://www.worldclassbatteries.com

Site looks good Crazy-T!! :thumbsup: Cant wait to see all ur bodies you got painted!!

:cool: Mark :cool:

Thanks everyone, new case will be done next week. Just in time for the midwest oval race in KC.

I bought 2 packs from Tony, Numbers ranged from 1.188-1.192's @30, I was very impressed when the numbers cycled higher then the lables, here are the number at 35amps

Pack #1 (label numbers, 464sec. 1.189 15int @30)
375sec. 4.72 4.74@1v 9.8 int (air)

Pack #2 (label numbers, 469sec. 1.192 14int @30)
389sec. 4.72 4.75@1v 9.7 int (air)


so on average i got 1.18's@35 amps which is higher then the labels on the packs

Also this was the last batch of 3800's that had lower numbers, this new batch should be killer!!!!!!!!

Those Numbers Are Low On Voltage And Hi On Your Air

BUT WHO CARES AS LONG AS THERE FAST ;)

Those Numbers Are Low On Voltage And Hi On Your Air

BUT WHO CARES AS LONG AS THERE FAST ;)


Like i said this was the OLDER DATE CODE, not the new one where the voltage got crazy,

for the older date code, those numbers are right in line, IR's might be touch higher than some, but the voltage is right there.

after 3 weeks, here are the latest numbers

#1
345 sec.
4.76
4.78@1v
9.8 air

#2
368sec.
4.74
4.75@1v
9.9 air


Pack #1 deadshorted
Pack #2 trayed for 1 hour before charge

Just so everone knows, the lables on these packs where only 1.18-1.19@30 amps

All my cycles where done at 35 amps

so pack #1 came out to a 1.19@35 amps, way higher then the label reads


KEEP UP THE GOOD WORK TONY

Just so everone knows, the lables on these packs where only 1.18-1.19@30 amps

All my cycles where done at 35 amps

so pack #1 came out to a 1.19@35 amps, way higher then the label reads


KEEP UP THE GOOD WORK TONY


I think traying them for 1 hr might be a bit too long. I think the current practice is to put them in a ZeroThirty tray just until the lights go out (usually less than a minute or two) and then charge them -- this way you don't have the runtime loss.

Also note that anytime you cut the runtime -- like on pack #1 -- you are going to have an increase in the AVG voltage just from the math. It doesn't necessarily mean the pack is any stronger. You have to look at the voltage throughout the discharge curve to see if it is really any higher -- from the discharge curves I've seen so far on the IB's, there is barely any difference dead short vs. not dead short -- the only difference is a loss of a bunch of runtime.

Most guys around here are NOT dead shorting any of the new cells (IB or IP).

Your mileage may vary :p

Great run for the World Class Batteries at Fastlane oval grand nats. 2nd in stock and 2nd in brushless. only ran 2 batteries for each class and they just got faster the 2nd day.

Hey Tony,
Great runs at fastlane you nipped at my tail all race long in b/l . Are you going to Omaha in nov ?

Kevin

Great job Kevin and Bob see you at the big race in Omaha.

What is the new website addy for WORLD CLASS BATTERIES???


Kris Fowler

worldclassbatteries.com

Thanks hill jack,

no problem

Tony, what do you charge to custom paint bodies? :wave:

Tony,

Give me a shout sometime....

Great job at fastlane Tony. C Ya @ Omaha.

See you in Omaha,I'll have a saved spot for you and Mike so i can go faster :thumbsup:

to the top.

Tony Mitchell,

What's the race date for Omaha, I'll be in the Quad cities for turkey day weekend, and would be willing to drive the 5 hours for a Saturday race???

Later, Bret

Oh no, Bret going to be in the area again!!!!! Omaha? We raced at there last weekend. Bring the dirt stuff because I think there is going to be a race in Indiana that weekend. Or you could go to Allen's in Springfield and run on the carpet.

just wanted to know if you guys were still selling any 3300 packs? thanks for any help.
~Jake Feskanin~

all i have is some 3300 no big #s thay are $5.00 each. the more you buy the cheaper they get. thanks tony.

Oh no, Bret going to be in the area again!!!!! Omaha? We raced at there last weekend. Bring the dirt stuff because I think there is going to be a race in Indiana that weekend. Or you could go to Allen's in Springfield and run on the carpet.

Hey Mike,
I don't have dirt stuff anymore, all pancar now. I didn't see a race date for the Omaha race, but I only have Saturday and Sunday available to race. I'm not going to take my stuff unless I have something confirmed and I need to make up my mind tomorrow because I leave Thursday morning at 6AM.
Anyhoo, sometime we'll have to see each other again.

Later, Bret

Hey Bret,
You can race at Allen's RC in Rochester, just outside Springfield, on Sunday or Galesburg on Saturday night.
We'll have to meet up sometime for sure.

Have a nice Thanksgiving,
Mike.

Galesburg races on Saturday not at night this week and I am thinking on going to Allens.If you like a short short tracks Silvis runs on Sunday they have some brushless and I think they let 19t run also.I might be able to bring Rod Gallaway so look out Kevin :wave:

Tony you have a PM

Adrian

New case will be in this week and they will be done by next Friday.Thanks Adrian for the info.

Tony when you get the New case give me a call on my cell. If you lost it i will PM you my number

Hey Tony, you interested in the brushless race on the event board? Maybe bring the old guy too.

Tony- New track record at Fastlane for Dustin Schorr 74 5.00.51 with your Batteries!!!
Hows the new shippment looking???? mite have to get some more from ya!!!!

I hope to have them done by next week. Great job :thumbsup: call me.Thanks Tony.

to the top

Tony you have a PM

got it. new batteries look great.