Was curious of anyone has any feedback on this new Battery Company located In Mass.........Heard the Owner Lino gave away a new Radio (value around $350.00) after winning a summer series up in York Maine. The radio was the prize and he gave it to some young kid in the pits who is new in the hobby.....
.....Upon hearing this I purchased a few Battery Packs from him today to try them out and help out his buiseness....That is how you promote the hobby...
.
Upon viewing his website I noticed his prices are good...........Was wondering
if anyone bought any batteries from him yet and how they ran......I have been
screwed by matchers who have not been so honest on numbers and so I am
reluctant to try anything from New Matchers however after learning he gave away a top of the line radio to someone new racer in the pits.....That was enough for me........
.
Rick Rezendes

Lino is a great guy.. Ive only been using his stuff for a short time.. you right, you cant beat his prices.. from the feedback i have heard and seen, his stuff is stout.. check there thread on rctech. its a long thread..

Lino is a class act. From motors to batts, you can't go wrong with his products and support.
Very approachable, always willing to dyno a motor for people even while wrenching on his own stuff.

On their site it says free rebuilds for life on all their motors, and the batts seem to be priced well, The only matched batteries Ive bought were promatch. Any insight on this Burby??
Andy

anyone bought any stock motors from this company?i was at a big race this past weekend and a guy was running one of there stock motors.he went to a friend of mine for a rebuild.he said that it has only been rebuilt 2 times before but the com was already down to nothing.i ask cause i too am interested in there product as the prices are right on.i am not saying that it was hyperforms fault..just wondering.

p.s that driver came in 2nd in the A.

well.........I know when I am at a big race...Ill cut the comm right down to 280............
if you wanna go fast.....sounds like your friend had a good motor

i hear ya for sure on that one but this one was 268.and ya it was a good one.

Hey guys, thanks for the praise. I wanted to point out that the coms I ship are usually 290+. The rest range between 285-290. I leave it up to the individual to decide whether they want to chop it down. Personally, I don't do it on the motors I run. I def don't do it as some kind of scam to get you to purchase a replacement arm. Not that I feel anyone is implying this.

It is very easy to take too much off while making a cut. You should barely notice any copper flying of the com.

We have had great feedback on our batts by those who have cycled/run them. Talk to locals such as Dennis Anger and some others Rick, they will let you know.

got an order of 4 packs the other day...ordered 4 more packs for a friend.....will try them this Week..........Will leave honest feedback

Bud,I got three packs and cycled them and last a few seconds on run time, but the votage stayed the same as the labels...I ran the packs and will say I can't say anything bad about them...

remeber new cells, take 2-3 runs before they start to get good.. the cells need to be trained to work as a pack.. It is not good to cycle new cells before they are run.. it is a diff kind of load.. i run mine 3-5 times before my first cycle...

I agree with Burbs....My home track will allow the new cells in another 3-4 weeks.....
so im using them in practice to "Break them In"...

Hey guys! I wanted to let you know that we will be carrying adjustable timing hand wound 19t motors for you oval guys shortly. They will be a D5 can with a hand wound D1 19t single (mabuchi wound) arm and standup brushes. They will come tuned with standup 4383 brushes and varying spring combos. We will also start carrying standup XXX and F brushes. The motors should be available next week.

Also, let me know if you get those cells tomorrow Rick. I should have known with the holiday, things would get messed up. I work pretty much 24/7 these days so I'm not always on the up and up on when things like holidays and weekends are. I didn't even realize it was Labor Day until around 4:00 in the afternoon yesterday! :)

It was good talking to you as always though...

Thanks Lino.........Very Satisfied with the service....Will try out the new packs tonight

How did the packs work out for you and your friend Rick?

My track will allow us to use them in a few weeks......Had a friend run a pack in practice and he stated it had some good rip......Trying to get all the packs with 2 runs on them to break them in........I tried a pack in practice and did not have the computer on...But it seemed fast...When the computer is on this week I should be able to gauge the performance......How many runs Lino do you think to break the packs In?.......They are definatley better that the GP3300's I have......

2-3 runs will get them working with eachother well.

Hello guys! I wanted to let you know I have standup XXX and 4383 brushes in stock. I also have added a hand wound adjustable timing 19t motor to our arsenal for your oval guys. It’s a d5 can with a d1 armature.

D5 can with D1 arms, is that NOT a Hybread??? as in NOT LEGAL....

PUF19 that's the most common configuration of all the d5 setups. the d1 arm or rpm blank which you know it as, was submitted to roar for approval in the d5 can for mod but with p94 brushes.

Thanks Mike.

Yeah, it's a D5 can w/ standard standup brushes and a d1 arm mabuchi wound which is 100% legal as far as my understanding goes...

The website has been updated so our hand wound adjustable timing 19turn D5 based motors can be purchased!

I wanted to let you all know that we will be matching our first customer batch of IB3800s. They will hopefully be available by a week from this Friday. In the past we were not happy enough with the test batches of these cells but the latest cell was excellent and it looks like IB has taken care of all the known problems. I will keep you all updated on availability etc over the next week. As always, we will do our best to keep them as competitively priced as possible.

Guys, we have a very limited number of GP3700 1.185+ 440 plus 4-cell packs available. They're in the high 1.18, low 1.19 range.

It's a new month and that means we have a new special! Our 1.175-1.179 assembled and unassembled GP3700 cells are on sale for the entire month of October. Check out the battery product page on our website for pricing.

Our first batch of IB3800 cells are ready and will be sorted and available on Thursday, possibly Wednesday. The numbers are sick with the majority of the batch in the 1.19-1.120+ range. Very few 1.18s all with 460+ runtime and average IR between 1.7 and 2.0. :)

Hey guys, we now have standup F-brushes listed on the website! :)

Hey guys, our IB3800 cells are now available both assembled and unassembled. Check them out at the following link. :)

www.Hyperform-Racing.com/IB3800.htm

It's a new month so we have a new special! This month we are offering free battery assembly on all IB3800 cells.

Great, I missed it by like 2 days:(

LOL MY luck. Ill just have to order more before the month is over :)

LOL MY luck. Ill just have to order more before the month is over :)

Send me an email with your order number and I will refund you the diference...

I ran my hyperform IB's this weekend down at classic hobbies in akron OH.. Man they rip..

I got mine today. I will run them this Sun. Wish me luck!!!!

I got mine today. I will run them this Sun. Wish me luck!!!!

Great, let us know how they run. Your refund is in process...

Another Tq and win today for the Hyperform powered machine.. two races at our home track, and tqo Tq's and wins. Not bad so far.. cant wait for two weeks till the turkey race..

Nice job Mike! :)

Thank You very much.
Andy

TQ and win Sportsman Stock @ HotRod Hobbies Saugus Ca. Thanks for the batteries they worked awsome!!!!!!!!!

Nice job!

TQ and second in stock @Racers Oasis Kingsburg Ca. first time on carpet, I love these batteries!!!!Thanks

Glad you're enjoying th cells. We have a fresh batch that should be ready by the end of the week.

yea but my $$ wont be ready.:)

Keep me one stomper Lino ..... racin again this sat.. going for my thrid Tq and win in a row.. A few of our mod guys are out af state at a race.. Looks like stock is going to have most of the guys in it from 19t.. should be a blast.. Then the next week is our thanksgiving bash.. should be a good time..Im gona need a stomper for the main. he he..

Plenty of good cells coming out of this batch. I don't think I'll be able to list any cells for sale below 1.2 AV! :eek:

IB3800 1.20+, 460+ cells are back in stock! Take advantage of our free assembly special. All cells ordered before 5:00 PM EST Saturday, November 19th will ship on Monday, November 21st. Orders placed after will ship upon our return from Cleveland and in the order they were received.

order placed and e-mail sent. Thanks!

Another check mark in the win column for my hyperform powered machine.. I had some trouble with the car in qualifying.. i ran a buddies car because he asked me to tune it in.. I had one good qualifyer which was good enough for second qual.. the car kept wanting to spin the other two quals.. anyway i got the hole shot in the main and never looked back.. thats 2 Tq's and 3 wins now in 3 race days..

Seven-Enjoy the cells

Mike-Nice job man. You heading to Snowbirds?