Does anyone who have any idea the exact dimensions for the boxes they use to "tech" the cars? I am putting together a point series and I would like to make the boxes so there is consistency with each race.

The classes that will be running are 12th scale GTP, 10th scale 4WD sedan and 10th scale pan sedan.

Thanks in advance

Mike Maloney

All the information is in the ROAR rule book.You got one with your membership.

Another option is R.J. Erich II. Check this out http://www.deccosoftware.com/forum/tech/RJErichII/Index.asp

Thanks for the help. I checked my rulebook and found what I was looking for I wanted to make sure my numbers were correct. They give measurements in mm.

THanks for the link. Its is very cool. I will shoot him an email.

if you didnt know

25.4 mm = 1 in

for the 2004 sedan nats toledo made 2 aluminum machined tech boxes. They were given to ROAR. Really slick.

Let's see if the machined tech boxes show up at future races. I certainly hope so. Those boxes were absolutely trick. I hope that ROAR takes good care of them!

Mike M - the metric dimensions are in place because a World Championship is competed in those classes. This was done by my predicessor. I don't totally agree, but I understand that move.

Eli - I concur with you. Will they ever show up again?