Hey guys; do any of you tell me the correct setup procedure for a GM V12 ESC? Thanks; Ernie P. :cool:

Here's GM website where you can download setup etc:::::::http://www.gm-racing.de/index2.htm

Thanks for the info on the GM website. Any idea how I can get the English version? Thanks; Ernie P. :cool:

the gm is a one touch that should be easy? Hit the button pull full throtal let the light come on and then full brake let the light come on than netural and that should be it that is what i did with mine.

Brandon

Thanks for the info, Brandon. I'll try it. Thanks; Ernie P. :cool:

ok let me know if it works for u if not i can find out!!

Brandon

ernie did that work for you

Nope; it didn't work. I'm lost. I pushed buttons; help the SET button down; pushed and released it; tried brakes first; accelerate first; for nearly an hour. The rear wheels don't spin; although they were spinning slowly with no throttle input, before I tried to set it up. Any help would be appreciated. Thanks; Ernie P. :cool:

I would give horizon hobbies a call they would know i dont know the number but go to yahoo and type in horizon hobbies and go to there website and get a number and call them and tell them your problem. they should be able to help you out. hope this helps


brandon

Thanks for the tip. I'll try it. Thanks; Ernie P. :cool:

no problem just like to help out best i can.

Brandon Snyder

Ernie p. did you ever try horizon and did you have any luck?

Brandon

Brandon; I had a few friends try to set it up. We finally decided it has to go to the factory for repair. When I send it, I'll ask for a copy of the setup instructions. Thanks; Ernie P. :cool:

yah mine also has to go back it took a big crap on me my car hit the wall and broke my bumper and the spedo was smokeing! let me know how you make out.

Brandon

Brandon; sorry to hear about your ESC. They tand to do strange things after a side trip into the wall, I'm told. I'll keep you posted on how the repair wroks out. I also have a V4 that needs a new switch; so it's time to get in touch with GM. Thanks; Ernie P. :cool:

ok i hope everything goes ok!!

Brandon