SteelCity_Goomb
04-18-2005, 02:47 PM
I bought a Nitro Quake new last year and still have not broken it in yet. It seems that the manual and the video tape are different. One thing that confuses me is they tell you to go three turns out from closed, and to turn clockwise until you feel some resistance. Well, this can be different depending on the person.(people do have different strengths) The point at which it starts giving a little resistance to the point it closes all the way, is quite quite a few turns. What I'm trying to say is, there's alot of leighway there.
The video seems alot different from the manual too. The final setting should be around 2 1/2 to three turns on the high speed needle, but that wouldn't be the case w/ the manual. Everybody seems to say that the brea-in process is vital as to how the truck runs. But w/ their directions it almost seems like a hit or miss process. I would appreciate it if anyone could help me. Thanks
Bryan
The video seems alot different from the manual too. The final setting should be around 2 1/2 to three turns on the high speed needle, but that wouldn't be the case w/ the manual. Everybody seems to say that the brea-in process is vital as to how the truck runs. But w/ their directions it almost seems like a hit or miss process. I would appreciate it if anyone could help me. Thanks
Bryan