Does any one know off any companies who make a rear arm mount to remove the rear toe on a t3 truck. I picked up ae zero degree mounts (7364) they are for the gt truck and wont fit with out modifications. I plan on running oval and the three degrees seems like to much.
Thanks RACERX1
Ray C.

Hammand Ghuman was the only company i knew of that had these jewels.My LHS usually stocks them or u can just take 3 degree hubs and reverse them to get zero 0 toe in ....(left hub on the right and right hub on the left ) and this mod is only 3.50 good luck .....Dave

Thanks Dave
i saw a set of 3 degree blocks and it didnt even cross my mind to do that at the time I bought the zero degree blocks.

Thanks RACERX1
Ray C.

No problem Ray , i've been racin oval gearbox trucks for like 15 yrs ....love the things and i've had them all. I have a T4 currently. If you have any probs shoot me an e mail @ rcracer3@iwon.com and i'll get back to ya...............Dave

Associated makes a 2 degree set, I know its not zero but its less.

Dave, are those "actually" 3 degree hubs or are they the ones that are designed for the 3 degree arm mounts so they are "technically" 0 degree? I've never seen 3 degree hubs for the T3. They have a set listed as 3 degree but they are the stock hubs that come with the T3 which are 0 as the arm mounts supply the 3 degree toe in.

Most of the guys around here run the 2 degree arm mounts that Pat suggested. Doesn't give you 0 but close. :)

HEY GUYS I found a site mo-motorracing.com they have the rear plate that has the front holes welded and then redrilled at zero degree and one at 1an a half degree on the right side check out there site I went ahead and made my own plate outa fiberglass so i have zero now. hey dave thanks to Ive been racing for about that long gearbox cars mainly losi and pan car this is my first ae since the rc10. on my old losi's i have allthe old parts that took the tow out for oval THANKS RACERX Ray C.