Poulan 2150 fuel line routing - HobbyTalk
LinkBack Thread Tools Search this Thread
post #1 of 3 (permalink) Old 11-20-2007, 09:40 PM Thread Starter
New Member
Join Date: Nov 2007
Location: North TEXAS
Posts: 2
Poulan 2150 fuel line routing

I was given a 2150 Poulan chainsaw that has been sitting for a few years and it won't run, it has fire to the spark plug. I took the cover off and all of the fuel lines are detoritated and some of them were broke loose and laying in the engine cover. The fuel pickup is also broken off and laying in the bottom of the tank. I have purchased new fuel line and replaced the fuel pickup line to the new bulb, but I do not know were the other lines go?? There are two fittings on the carb, and I know that one line must go from the bulb to the carb but which fitting on the carb, the one near the engine? or near the airfilter?? It looks like the other line must go to the fuel tank because there is a broken fuel line still in the hole into the tank, is this another fuel pickup line or something else??

Could someone please help with fuel line routings?

wiggins is offline  
Sponsored Links
post #2 of 3 (permalink) Old 11-20-2007, 10:05 PM
Top Dog
30yearTech's Avatar
Join Date: Sep 2006
Location: Central Texas
Posts: 6,097
There should be one line coming from the tank with the fuel filter attached to it. This line will go to the carburetor fitting and should be on the right hand side of the carburetor as you are standing in the operator position behind the saw.

There should be a fitting on the left side of the saw and a line will go from this fitting to the suction side of the primer bulb.

Finally the last hose will go from the discharge fitting on the primer back into the fuel tank.

Hope this sheds some light.

Best of Luck...

Last edited by 30yearTech; 11-20-2007 at 10:06 PM.
30yearTech is offline  
post #3 of 3 (permalink) Old 11-20-2007, 11:21 PM Thread Starter
New Member
Join Date: Nov 2007
Location: North TEXAS
Posts: 2
Thanks for the quick response, I will try hooking the new lines up tomorrow.

Thanks again
wiggins is offline  


Quick Reply

Register Now

In order to be able to post messages on the HobbyTalk forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome